Jump to content
SAU Community

Recommended Posts

I'm on the hunt for a track/drift car at the moment but want it to be road registered so if I need to I can drive it around town or to the track or whatever.

Some things I'm not clear on, and I hope someone else can enlighten me, if a car is reg'd in another state that can't be transferred into Vic can it? My understanding is you can cash in that rego and then you have to get a full new rego in Vic? Is that right? Also if a vehicle has a current RWC in another state, is it valid in Vic?

The last gray area for me is engineers certificates, as plenty of the cars I'm looking at have had mods or different engines put in. Is an an engineers certificate from another state valid in Vic?

Thanks guys, don't wanna roll up to Vic roads and be told I can't reg the car is all.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/258695-registration-questions/
Share on other sites

I'm on the hunt for a track/drift car at the moment but want it to be road registered so if I need to I can drive it around town or to the track or whatever.

Some things I'm not clear on, and I hope someone else can enlighten me, if a car is reg'd in another state that can't be transferred into Vic can it?

No

My understanding is you can cash in that rego and then you have to get a full new rego in Vic? Is that right?

Yes

Also if a vehicle has a current RWC in another state, is it valid in Vic?

No

The last gray area for me is engineers certificates, as plenty of the cars I'm looking at have had mods or different engines put in. Is an an engineers certificate from another state valid in Vic?

Don't know for sure... I hear the voices now "Never Assume"

Edited by iamhe77

Ash will no doubt be the fountain of knowledge on this but as far as I'm concerned as long as the engineer concerned is a registered engineer able to sign off on automotive modifications the certificate should be valid.

Why not contact Vicroads and ask?

Give me time - one mod issue at a time :D

The car vs VASS engineers vs VicRoads - all depends.

Depends on the car, level of modification and so on. One key issue is exhaust noise - mine was checked as part of a VASS Engineers Cert - a drifter isnt going to be quiet so you'll have issues there no doubt.

Also a RWC will be hard to get for modified cars. Lots of 'usual' RWC places wont touch highly modded cars simply because they are run of the mill mechanics that dont know anything. They dont want to spend the time reading the VSI's (Vehicle Standards Information) and so on, and as they are signing off on the car, they are not willing to put thier license to the test.

If you could tell the car, mods and so on... then that makes life a lot easier.

Basically a dedicated drifter is going to be near on impossible to get registered unless you do it dodgy, and then you bring another can of worms into it if you happen to get pulled over etc.

OK Thanks heaps for the info.

I've been focusing on cars with minimal mods and that are already road worthy and reg'd to make things easier but we'll see how we go.

I think for simplicity I'll also stick to Vic cars unless a mega deal pops up.

Forgot to mention: I've stopped looking at hard core drift cars and been watching mild modded road cars instead as I suspect I'll have less hassle with these.

Edited by ActionDan

Nah I'm after something I can drive on the street too if the need arises but that I can still have fun at the track with and slide a bit. I'm not out to win comps or anything just have some fun and tie me over til I buy a 34 GT-R in a year or two. Just sick of rolling my daily with nothing fun to play with =\

Edited by ActionDan

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
×
×
  • Create New...