Quick Help Asap! Rb 26

[Adz2332]

Need to know asap if an rb26 from a 32 gtr will fit a 33 GTR with no problems etc?

looking at this classified

http://www.skylinesaustralia.com/forums/Rb...23#entry4453223

Just need to know quick

[The Dan]

Need to know asap if an rb26 from a 32 gtr will fit a 33 GTR with no problems etc?

looking at this classified

http://www.skylinesaustralia.com/forums/Rb...23#entry4453223

Just need to know quick

It's a GTR, there are never 'no problems'

But yes, it will fit

[superjet760]

YES it will no probs

[Adz2332]

Cheers !

lol i get the no probs thing to lol...

Just as long as both a 33 GTR and a 32 GTR engine sitting on a palett look and are identical etc

[Adz2332]

But isnt the oil feds and oil internals etc differnet

[doo doo]

Wouldn't stop it from fitting. Are going to do some work to the engine? The difference that springs to mind for me is the crank and oil pump situation. If you're going to pull the engine down and beef it up then you'd consider using an R33 crank and decent oil pump. If you want to keep a stock engine I'd actually be looking for a R33 engine- you'd be more likely to sell the car if you needed to also. For me it's more about the age of the R32 engine ( I don't believe in the k's)- unless you're pulling it down (and then going with new/bigger turbos, crank etc,) I wouldn't consider the saving over an R33 engine to be worth it for the difference in value it makes to your car.

[Adz2332]

cheers.

the engine would remain standered. and the car is going to be sold etc

[doo doo]

Ah, then you'll need to work out whether the difference you save in the engine cost is going to be worth the (lower) price you'll get for the car. Your call, but do put yourself in the shoes of a prospective buyer.

[Lippo]

And if the buyer knows his stuff, then it isnt hard at all to look at the new eng number and look it up that its out of a 32. Just a point to think about.

[femno]

Just one external difference. The water oulet at the rear d/s of the block that goes to the heater is a little different from the 33 one.

[260tech]

Need to know asap if an rb26 from a 32 gtr will fit a 33 GTR with no problems etc?

looking at this classified

http://www.skylinesaustralia.com/forums/Rb...23#entry4453223

Just need to know quick

Hi Adam, I am wondering now if you still want my R33 motor @89km genuine, with mechanics report on compression check & dyno sheet 214hp @4w bog standard boost (both from Tenagah Motorsport) removed from an RS260 family wagon for $4k plus 50% of freight cost ex Perth. I need to know else I am wasting my time & money travelling to Perth, getting the motor freight ready for shipping etc., at my cost without a deposit or any financial committment to date on your part in the transaction. Of course their is no warranty implied or otherwise, I have no control over the install or treatment the engine will be later subjected to.

Personally I have never pushed the motor past 6k, there having never been any need to, dyno sheet is posted for info & as I said motor was changed out for an N1 because I could, no other reason, give it a 100k service & drive it.

My 2c, no offence.

Cheers GW

[Adz2332]

Yep cheers engine sorted with 260Tech

all good guys!