Jump to content
SAU Community

Recommended Posts

Up for sale is just some random bits that I have collected unneccesarily over the years!

All prices are negotiable, pick up from Sydney west, I will post at buyers expense.

R33 SERIES 2 bonnet S badge

Great condition

$20

R33 GT badges pair

Good condition

$50

R33 SERIES 2 Dash facia surround, comes with clock and all switches and vents

Great condition

$100

R33 SERIES 2 Centre console with cup holder type centre and perfect handbrake boot

Good condition

$30

R33 Stock parcel shelf with no holes cut

Good condition

$20

R33 Rearview mirror

Great condition

$20

R33 Stock Rotors SET OF 4 removed due to going slotted

Good condition just need a light machine due to surface rust, plenty of meat left!

$40

R33 Assorted boot trim pieces, imcomplete set have some doubbles also

Average conditon depending on what piece you choose

$5 a piece or free if you buy something from above!!

I have some other interior bits too so just PM me and I might be able to help

post-49849-1236128615_thumb.jpg

post-49849-1236128623_thumb.jpg

post-49849-1236128632_thumb.jpg

post-49849-1236128646_thumb.jpg

post-49849-1236128658_thumb.jpg

post-49849-1236128673_thumb.jpg

post-49849-1236128682_thumb.jpg

post-49849-1236128694_thumb.jpg

Edited by ThirtyThree
Link to comment
https://www.sau.com.au/forums/topic/259542-fs-r33-parts-clearout/
Share on other sites

R33 SERIES 2 Centre console with cup holder type centre and perfect handbrake boot

Good condition

$30

Do you also get the ash tray for the back passengers as well? How much for shipping on the GT Badges and Console to SA, if you are willing to post.

I Bags the S Badge

PM replied

damn... 15 mins to late for the S badge..!

You know you want some GT bades :bunny:

R33 SERIES 2 Centre console with cup holder type centre and perfect handbrake boot

Good condition

$30

Do you also get the ash tray for the back passengers as well? How much for shipping on the GT Badges and Console to SA, if you are willing to post.

PM sent

have you got the steering column surround? Is it completely unmarked, if so, ill take it. I would also take the lid bit to the centre console

no steering column surround that i know of but ill check for ya. PM sent

Edited by ThirtyThree
R33 Stock Rotors SET OF 4 removed due to going slotted

Good condition just need a light machine due to surface rust, plenty of meat left!

$40

can i get a measured thickness on these?

Im assuming there gtst and not gts?

Edited by W0rp3D
where abouts in Sydney are you?

hills area

can i get a measured thickness on these?

Im assuming there gtst and not gts?

gtst and ill get back to you on thickness

Hey mate...just wanna know how much for the centre console and rearview mirror posted to Brisbane 4152

PM sent

do the s2 dash surround fit on the s1? they look about the same... if so i'm interested

Hey mate the series 2 and series one are interchangeable, the series 2 one is a little more modern looking as it has a slightly different shape, to yours if you look closely at it, and the series 2 oen doesn't have that little coin holder thing next to the mirror switches which looks like it was useless anyway!

Edited by ThirtyThree

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...