Jump to content
SAU Community

Recommended Posts

I think I've probably already said it, but I owe a hge thanks to everyone that has helped on this car (and it has been a lot!)

Neil in particular for all his hard work this weekend....and every other bloody weekend in the last couple of years. He has his own race car and champ to run (and win back to back this year I guess is the plan) but still gives heaps of time to help. And without Mark's help I never would have worked out which end of the spanner to push on (veeeeery patient guy)

More recently, John from UAS has been a huge help in preparing the car including the great new tune (yep found some extra ponies over xmas) and right up to staying open late last night to help solve our overheating problems

Hoping the motor holds together to have a real go at the whole championship, I can’t afford another rebuild this year so if it lets go again its over :)

  • Replies 156
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Thanks mate.

The car is standard n1 spec....32 n1 turbs @ 12psi, only mods are big exhaust, powerfc and Sydneykid bushes, shocks and springs. about 240kw which seems to be enough. It went much nicer when John turned it up to 18psi on the dyno (over 300) but we have to run standard boost. In fact the regs require a pop off valve which chucks out all the boost if it goes over 12psi.

Tyres are Kumho V70A, they are the new series control tyre which we used for the first time this weekend. I think they are a good second quicker than the Yoko A048R we used to have to run.

And its 1550kg with me in, so no lightweight either. The poor old commodores come in at 1630 though so at least I'm ahead there.

yeah I would be happy to swap mine for yours lol. BTW do you have standard ratio gears and diffs? You are going (way) quicker than me but using 2nd more?

Are you coming down to Wakie Dave? We just entered today, I've never been brave enough to enter one round until the one before is over :D

hi

we run 4.1 diff gear with 18" slicks not sure about wakie? i am spose to be running the zero car in the rally near bathurst that weekend.(LHD WRX) woohoo!!!!

some more footage of the starts. you can see how much cement dust on track race 2. car a bit of a hand full.

dave

BSM

ok fair enough, let Geoff know I'm ok to drive your car as well as mine.

Interesting how the start went, those guys got off the line pretty well. The race I did against them (day/night combined grid) they were rubbish.

I can't beleive how close you are to those cars - you have to give away at least 200kg and 200hp to them. very little wheelspin too considering the power you are putting down.

*edit* lol yeah race 2 start was better :D Jackson wasn't shy about pushing you off the track though

  • 3 weeks later...

OK.....round 2 this weekend at Wakefield....is anyone else entered? I hear Dave would rather drive rally cars and Geoff must have lost my number because he hasn't called :P

we've got a 1 hour enduro. It will be interesting to see if fuel, car and driver can last that long.

OK.....round 2 this weekend at Wakefield....is anyone else entered? I hear Dave would rather drive rally cars and Geoff must have lost my number because he hasn't called :P

He called your mum- I hear she's pretty quick around Wakie

(not to mention that your wife's arguably done better in a daewoo there than you :P )

Updates?

A quick one, cos I'm shagged worse than the tyres were in qualifying.

Duncan proved he's not just a one trick wonder.... started from third, in first by turn one - up the inside this time ;)

Held the lead (though there was some fun when the safety car came out and the two blokes behind didn't see the flags).

After that was redressed and the race restarted (after 4 laps under yellows) he pulled out another good start and the win :)

Race 2 tomorrow isn't for points so I'm guessing he'll be taking it easy (pffff yeah right!)

How things go in race 3- the one hour enduro- is anyone's guess!

Why not use tomorrow mornings race to practice the wheel change...Screw the non-champ race,,,it means nothing and I'll bet that the other guys will treat it the same. Practice the wheel change twice.

Well Done Duncan,,,I'm smiling again.

Neil.

His got me changing the wheel.

Stupid bloody wheel, trolley jack and wheel brace not the most fun way to do it thats for sure.. The only loose nut will be the one sitting behind the steering wheel.

I think between race 2 and three there will be plenty of practice time too.

Kel posting using D's laptop here...

So Duncan set another record today, and one we would have preferred not to set – the first GTR to win a race with what we think is a spun big end bearing :P

Duncan started race 2 on the front of the grid and led from turn one right through to the finish. Unfortunately as he approached the chequered flag the oil pressure became a little non-existent (gooooooone) and the massive fail warning light came on.

We’re hoping it’s not too bad (only a light knock) so we could still be a chance for next round.

But no enduro for is this afternoon sadly, which is a shame as it had just started to rain and would have given us an even chance of a good result

I hate this racing caper sometimes

Big thanks to Brad and Jase who came a long way for not a lot of action.

I think my *no drinking before Targa* rule goes out the window tonight

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...