Jump to content
SAU Community

Recommended Posts

If you were in Brisbane I can bench test them for you.

I don't know anyone in Melbourne with the same equipment. There are resistance checks you can do as above was suggested but even they can be misleading at times.

r33 s2, car is missfiring above 4000 revs i regaped my plugs to 0.8 and it fixed the problem for about an hour and now its back to missfiring, i taped the stock coils up wit electrical tape aswel. so since spark plugs only worked as a temproary fix im assuming changing my coil packs will fix the problem what do you guys think?

r33 s2, car is missfiring above 4000 revs i regaped my plugs to 0.8 and it fixed the problem for about an hour and now its back to missfiring, i taped the stock coils up wit electrical tape aswel. so since spark plugs only worked as a temproary fix im assuming changing my coil packs will fix the problem what do you guys think?

It's a possibility man.

Mine was doing something similar to this and when I changed to Splitfires, the problem was solved. Mine was breaking up above 4000rpm on 7lb, and at 3500rpm on 22lb of boost, and she was spewing a shitload of black smoke.

Whether your issue is the same or not can only be discovered through a process of elimination.

I have seen many questions asked regarding this through the forums and there have been several different courses of action taken. Some have had ECU, TPS, spark plug etc issues.

Do a search and you will find what the other guys were discovering, and that will help you to get to the root of your problem.

when your std coils are dead they work fine and then one day they just start to misfire city when the engine is on load/boost

replacing plugs etc doesnt fix the issue as the coils are breaking down. mine died at 160,000kms and replaced with splitfires no issues after that

if its happened all of a sudden and youve put in new plugs then yeah coils are toast - they die sooner or later

when your std coils are dead they work fine and then one day they just start to misfire city when the engine is on load/boost

replacing plugs etc doesnt fix the issue as the coils are breaking down. mine died at 160,000kms and replaced with splitfires no issues after that

if its happened all of a sudden and youve put in new plugs then yeah coils are toast - they die sooner or later

ahh k i see, well i got some more information ive noticed now its missfiring only when its cold like early in the morning when the weather is warmer its fine, is this also sign of coils? just wanting make sure before i got and spend 600

ahh k i see, well i got some more information ive noticed now its missfiring only when its cold like early in the morning when the weather is warmer its fine, is this also sign of coils? just wanting make sure before i got and spend 600

I got a set of these a couple of weeks ago and they are great. http://www.skylinesaustralia.com/forums/Co...80&start=80

Only cost me $350 with post and they are about to release the series 2 versions also.

im pretty sure as well that higher up the rpm the voltage to the coils drop which will make the car miss. you have to run a relay to the coils which will give it constant power. well thats wat im going to try with my ceffy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...