Jump to content
SAU Community

power fc with r33 auto

walkoau
 Share

Recommended Posts

walkoau Mentor

walkoau

Posted
  • Author
Posted

craz0

i read ur thread, very interesting. i may just buy a power fc and pop it in and see how it goes, (like 4door sleeper).

have you happened to do anymore research other than the thread?

craz0 Proficient

craz0

Posted
Posted

I have just bought the power fc should be here next week. I will let you know how it goes.

As from the other thread I contacted wolf and as far as they are concerned their plug and play works with the auto skylines.

I contacted a few people about the apexi pfc and everyone said they don't hook up to the auto's because of problems talking to the auto ecu.

But 4 door sleeper reckons that the pfc works fine with his 93 model auto skyline.

skylineakt Rising Star

skylineakt

Posted
Posted

Good luck craz0. Keep us posted about your little experience. The thing is if the Wolf guys can manage to communicate between the auto ecu to their ecu, I don't see why the Powerfc would be a problem.

Maybe you just need to find the right guy and workshop to do it.

Or maybe that the Powerfc is not as easily modified as the Wolf unit is.

Should be interesting, as I'm in the process of getting an E-manage. It also has a problem with the auto with the ignition function, but I might have the right guy to solve it?!?

walkoau Mentor

walkoau

Posted
  • Author
Posted

good luck craz0, let us know how you go.

mine is also a 93 model 33 4 door so if it worked for 4door sleeper im hoping it will for me too.

the way it was explained in ur other thread and from what u said about the wolf unit it sounds like its just plug and play with no other mods needed for it to communicate with the auto ecu if this is right and the power fc dosent really work then the wolf is the way to go,

anyone know who can tune the wolf in sydney?

i would rather an apexi power fc so we will have to cross our fingers and hope the one u bought works for you craz0.

then we can put an end to the legend and say it does actualy work with the autos.

Justin

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • MBS206
      Most women will agree that parking is the most taxing part of driving

      By MBS206 · Posted

      It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...