Jump to content
SAU Community

Recommended Posts

hey guys i have some parts from a gtr ive seperated for parts for mine which i no longer need

genuine r32 gtr alloy bonnet some small dents really crappy paint easy enough to get perfect $350

passenger side r32 gtr alloy guard no indicator hole has some damage needs work $150

drivers side r32 gtr alloy guard with indicator hole great condition has a slight rub/scuff/dent $200

genuine r32 gtr grille great condition no cracks $150

genuine r32 gtr bonnet latch and support pieces complete unit $100 (needed to put gtr bonnet on gtst)

all parts located in toowoomba qld 4350 happy to freight if you organise the courier I DO NOT HAVE TIME TO GET FREIGHT PRICING

wrecking complete r32 gtr if you need anything else PM me

cheers

Edited by WHITE R32
Link to comment
https://www.sau.com.au/forums/topic/260311-cheap-r32-gtr-front-end-parts/
Share on other sites

heres some pics...

the black guard is near perfect other than the light rub at the front of the wheel arch at the top (dusty as in pics)

and the grey guard is the one which needs work (bit wet in pics)... but been ally theyre easy enough to work with it has damage at the bottom near the jacking point from been jacked up but this is also easilly fixed and not seen because of the skirt anyway

neither guard includes the bracket that bolts onto the front as i need those

bonnet is rather good just crappy paint (wet in pics)

grille is perfect

post-1868-1236758056_thumb.jpg

post-1868-1236758074_thumb.jpg

post-1868-1236758083_thumb.jpg

post-1868-1236758092_thumb.jpg

post-1868-1236758100_thumb.jpg

post-1868-1236758109_thumb.jpg

post-1868-1236758123_thumb.jpg

post-1868-1236758133_thumb.jpg

post-1868-1236758142_thumb.jpg

Edited by WHITE R32

is the bracket the same as the r32 gts-t/gts brackets that u say arent included cos u need. its the little bracket near the head light right?

Do you have the diff? If so what do you want for it and can it be posted to Sydney? If its too much trouble dont worry about it, But I do need a diff soon!

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...