Jump to content
SAU Community

Recommended Posts

Hey guys,

I have a quick question, My r32 is stock and i feel like theres lag in the turbo.

I've heard from people they said that there should be no turbo lag since its a twin turbo because it uses 1 at lower revs and 1 at higher revs.

When i do test my car, i think the turbo kicks in around 3000rpm (thats when i feel the power :|).

By the way im not a reckless driver and normally dont speed, so im not too sure if this is normal for my car or could it be some problem with the turbo? could it be the set up? or some electric problem?

Please help me settle this problem.

Cheers guys!

Link to comment
https://www.sau.com.au/forums/topic/260396-r32-gtr-stock-performance/
Share on other sites

you are thinking about a sequential turbo set up like in a liberty, GTR's turbos run simultaneously, one feeds off exhaust from front three cylinders, the other off the three back cylinders, their charge is joined prior to entry through the intercooler, then into plenum, and fed into cylinders to mix and explode with ya go go gas

"The engine also uses a parallel twin turbo system. The turbo system is arranged so that the front turbo is powered by the front 3 cylinders, and the rear turbo is powered by the rear 3 cylinders. The turbo chargers are of equal size, and are set by the wastegates to limit boost pressure to 14.7 psi, although the Skyline GT-R has a built in boost restrictor to keep boost under 10 psi."

yeah 3 - 3,500rpm usually is when you start to see the light at the end of the tunnel!!!

:D

I've heard from people they said that there should be no turbo lag since its a twin turbo because it uses 1 at lower revs and 1 at higher revs.

Stop taking their advice - they're wrong :(

Supra's also have sequential turbos (and they are shit) FYI

A great way to combat that pesky sluggish period below 3000rpm is to rev the car to 4-5000rpm and dump the clutch :(

On a more serious note.. Definition of "Turbo Lag": Within a turbocharger's operating range (ie. in your case about 3000-7000rpm), lag is the delay between the instant a car's accelerator is depressed and the time the turbocharged engine develops a large fraction of the power available at that point in the engine's power curve.

Below 3000rpm the engine doesnt flow enough exhaust gas to spin the turbine fast enough to make boost. So what you're experiencing isnt actually "turbo lag" by definition :cheers:

You'll be suprised how much nicer they act at 15psi :D

But yeah they're pretty crappy turbos, and the ceramic wheels are dodgy as all hell. I doubt you'll find anyone on here who wouldnt recommend changing them as soon as the budget allows :P The most responsive direct replacements are HKS GTSS, or Garrett 2860-7's for the budget minded.

Enjoy!

You'll be suprised how much nicer they act at 15psi :D

But yeah they're pretty crappy turbos, and the ceramic wheels are dodgy as all hell. I doubt you'll find anyone on here who wouldnt recommend changing them as soon as the budget allows :P The most responsive direct replacements are HKS GTSS, or Garrett 2860-7's for the budget minded.

Enjoy!

This quote is true, chuck on new turbos asap. When those turbo's go bang, which may be in the not too distant future, the ceramic dust stuffs your engine. I have N1's in mine (all steel), i think they are the same size as the stock ones and they are heppy to sit on 1.2 bar. Good Luck!

GTR system is definately not a sequential turbo setup. Easy way to check how your boost is going is go buy a $40 boost gauge and see whats happening, you could have a vac leak or one of your actuators playing up or even worse a turbo problem.

If you need to replace them get some HKS 2510/30/40's great turbos.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mine is all -12, I’m running a dry sump in a billet block though 
    • HG's high flow is not "bolt on". The core is shorter, moves the comp cover rearwards in the engine bay. means you have to deal with the inlet plumbing a little bit. This is probably something to consider with every "bolt on" turbo anyway.
    • HyperGear. Just get a high flow of the stocker. Good, reliable, and should bolt on. Yes it will want things like a retune once done, so you need to factor this in to your spend too.
    • Hi. Iam looking for some "cheaper" bolt on turbo on RB25DET NEO. I do not want "big" power just better reliability than the stock turbo which is "fot now" good but is old and i do not think it has "easy" life. One the Skyline here running some "temu" china Turbo but i dont trust those... Thanks!  
    • Hi guys, Making some space/cleaning up. A whole heap of random OEM R33 GTR parts and other random bits and bobs. I will update this thread as I go. Parts are located in Moorebank NSW 2170. Pickup preferred but will post at buyers expense. Prices are negotiable. If they don’t sell it will go in the bin. Item 1: BOV return pipe. $40 Item 2: RB26 cam gears. $20 Item 3: R33 GTR torque split, oil temp, boost centre gauge. $100 Item 4: RB26 fuel rail x 2. $20 each Item 5: RB26 Recirc valves. $50 Item 6: OEM upper front arms. $20 Item 7: Royal Purple Max Gear 75w-140 1 quart/946 ml x 5. $50 each or 5 for $200. Item 8: OS Giken 80w-250 diff oil 1 litre. $25 Item 9 Eibach springs. ers-11-140-60-0140. $100 https://www.streetfx.com.au/eib140-60-0060-eibach-ers-140mm-length-x-60mm-id-coil-over-spring?_ga_campaignid=22235933977&_ga_adgroupid=180146800292&_ga_keyword=&_ga_device=m&_ga_target=pla-295238231169&_ga_locint=&_ga_locphy=9071723&_ga_matchtype=&_ga_network=g&_ga_device=m&_ga_placement=&_gcl_id=CjwKCAjwlt7GBhAvEiwAKal0cvkVE_hstv24cDiaICsIk1oznH9zAoJf3By6vR3Tpe7jmByqM6JFHBoCZYAQAvD_BwE&gad_source=1&gad_campaignid=22235933977&gbraid=0AAAAADPiTbo1xAuvnjIWWYnezivf-BUSY&gclid=CjwKCAjwlt7GBhAvEiwAKal0cvkVE_hstv24cDiaICsIk1oznH9zAoJf3By6vR3Tpe7jmByqM6JFHBoCZYAQAvD_BwE    
×
×
  • Create New...