Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

Just another f**king weekend in shithole. Good new is another 3days more days and I'll be home. And more low+major servicing over the coming weekend!

This month is gonna be f**ked too with so many bills coming. $1.5k water bill....

shocking weekend. had the flu for the duration of it. still got it, so staying at home and getting in some ps3 time

went down to mercury a bit for the dyno day though. entirely too many flat brimmed hats around for my liking....

WTF?

All the joy of home ownership man. Long story short, got 2 main water pipe burst while I'm away from home and clocked 800kL of water in 3weeks. Just to give an idea on consumption, we use around 40kL per quarter.

Morning guys, hope you had a fun weekend!

Was at a party saturday night... a mate decides to go home to get his ipad so gets driven by someone else. First mate decides to ride his trail bike back to the party and comes off it halfway back. Hadn't been drinking or anything.

Broken elbow, a wrist the size of a tennis ball, and severe internal bleeding in one of his legs. He can't walk on it at all, and can barely move his left arm. Poooor karrrnnnt. Took him pizza last night..... doesn't really help that much though hahahaha

Morning guys, hope you had a fun weekend!

Was at a party saturday night... a mate decides to go home to get his ipad so gets driven by someone else. First mate decides to ride his trail bike back to the party and comes off it halfway back. Hadn't been drinking or anything.

Broken elbow, a wrist the size of a tennis ball, and severe internal bleeding in one of his legs. He can't walk on it at all, and can barely move his left arm. Poooor karrrnnnt. Took him pizza last night..... doesn't really help that much though hahahaha

Thats no good.

I kinda regretted not getting the project mu scr pro rotors along with the suspension now with aud going up...

Skid to leave

noted

sarp hottie?

went down to mercury a bit for the dyno day though. entirely too many flat brimmed hats around for my liking....

rofl rofl

i drove past today on the way to work

huuuge huuuge skid to leave - goes for about 20metres, epic black lines

but yes, i can only imagine the crowd there..

Morning mangs, scarnon, etc.

Anything happening for origin this time?

How was everyone's weekend?

Skid to leave

Hey mangs. Weekend was alright. Not long enough.

Just another f**king weekend in shithole. Good new is another 3days more days and I'll be home. And more low+major servicing over the coming weekend!

This month is gonna be f**ked too with so many bills coming. $1.5k water bill....

I feel your pain. We've been having bucket showers since Thursday waiting for some f**ker to come out to fix our hot water!

shocking weekend. had the flu for the duration of it. still got it, so staying at home and getting in some ps3 time

went down to mercury a bit for the dyno day though. entirely too many flat brimmed hats around for my liking....

At least you have a PS3. The lowly scum (like myself) don't have access to such fancy thangs.

Morning guys, hope you had a fun weekend!

Was at a party saturday night... a mate decides to go home to get his ipad so gets driven by someone else. First mate decides to ride his trail bike back to the party and comes off it halfway back. Hadn't been drinking or anything.

Broken elbow, a wrist the size of a tennis ball, and severe internal bleeding in one of his legs. He can't walk on it at all, and can barely move his left arm. Poooor karrrnnnt. Took him pizza last night..... doesn't really help that much though hahahaha

That's rough man. How's he doing now?

oi question

if my shifter thread is too thin for my dildo shifter thread - where can i get an adapter?

ive heard ppl say u can use hellicoils (spelling could be wrong)...

thoughts children?

my current adapter thread shat itself - and a stock gear shifter is not as awesome as my dildo one :whistling:

yeh i have considered it - but atm would prefer a quick fix option

unfortunatly my racetape and zippy tie skillzz (that killz) cant be used in this scenario :whistling:

Morning mangs, scarnon, etc.

Anything happening for origin this time?

How was everyone's weekend?

Skid to leave

I'm heading out to Swifts sports club to this.

http://www.xxxxgoldv8supercars.com.au/gold-retreat/

cut the end off the shifer and weld a bolt (with the head cut off) with the right thread onto it

thats a bit too cronic for me man

im just looking for those coil adapter thingss

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...