Jump to content
SAU Community

Recommended Posts

Exactly what tyre are you looking at?

If its a true semi slick expect to get maybe a couple thousand km out of them.

Heat cycles do affect as well so the tyre might actually be useless long before the tread depth is low.

There is alot of nonsense around about semi slicks. From my experience I have formed the following opinions:

Yes they are street legal. Good luck convincing the policeman who just pulled you over of that fact, however.

They go not have a great deal of tread depth - added to which most cars will rapidly degrade the outside of the fronts - so what tread depth you have will not be legal for long.

You can happily drive them on the road. I drive from Bunno to Wanneroo & back.

R comps (proper ones, not Federals or Falkens) need heat to develop all of their available grip. None the less even when cold they will outperform most road tyres in the dry.

They last a reasonable amount of time on the road. Certainly if you are running your car on the road & periodically on the track most of the tyre wear will occur on the track. On the upside however R comps last much longer than road tyres when driven on a track (unless you are a numpty on the track). Old R comps are just a waste of everyones time.

You will not heat cyle tyres on the road - not unless you are being stupid.

The down side of running R comps on the road are:

They are noisy as hell.

The tramline like a bitch.

Their stiff sidewalls make the car uncomfortable over bumps etc.

They pick up every little rock/stone/anything and fire it into your paintwork.

You have to keep adjusting the pressures from track to road & back again.

I am less than convinced they will be helpfull if there are puddles on the road.

Do not put R comps on one end of your car & roadies on the other. That is just a recipe for having an accident.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
×
×
  • Create New...