Jump to content
SAU Community

Recommended Posts

Hi Guys,

I have a fairly stock R34 GTT, full exhaust, FMIC, pod filter, BOV, AVCR.

I have set low on the AVCR to 0.5bar and high to .75bar.

I have noticed especially on high boost pinging at and above 4000rpm.

What causes pinging, and what sort of things can resolve pinging?

Link to comment
https://www.sau.com.au/forums/topic/262384-pinging/
Share on other sites

Too much timing, poor fuel, not enough fuel

So it'll either be your running too much timing, or fuel pump dying and/or blocked fuel filter

I assume your using PULP... so one of the above

I would go and get a FULL service, oils, plugs, filters and THEN put it on a dyno and check the AFR's and go from there

Link to comment
https://www.sau.com.au/forums/topic/262384-pinging/#findComment-4494333
Share on other sites

Most people can't hear detonation, easiest way to describe the sound is the sound that is made on a geiger counter that detects radiation. This is what you are hearing?

Very rare for the stock ECU (with only such minor mods) to allow such audible detonation at only 4000rpm, hence why im thinking it might be something else that you think is detonation.

Link to comment
https://www.sau.com.au/forums/topic/262384-pinging/#findComment-4494989
Share on other sites

I've never heard anyone call it "pinking" before either lol It's eithet dotonatin/knocking or pinging.

Anyway, I have tried to hear an engine pinging when the tuner said it was doing it ..and I was right next to the engine with the bonnet up and I couldn't hear shit over the engine noise.

So for you to be able to hear it from your driver seat whilst driving .. hmm, it's either not detonation or you've got some violent detonations and the engine is about to blow up :down:

Link to comment
https://www.sau.com.au/forums/topic/262384-pinging/#findComment-4495490
Share on other sites

By the way, at the very least you should have your ecu remapped if you can't afford an aftermarket one .. Toshi here in Sydney does a GTT for $400 I believe. He'll fix up your ignition timing and AFRs to prevent detonations

I think there's a guy called Dr Drift down in Melbourne who does the same thing.

Link to comment
https://www.sau.com.au/forums/topic/262384-pinging/#findComment-4495506
Share on other sites

Just ordered myself a Walbro fuel pump and will be changing that, will also get myself a fuel filter on the weekend.

I have booked my car in for a remap and dyno run with Dr Drift, but he couldn't fit me in till mid may so I will just have to wait until then.

Thanks everyone for all the advice I appreciate it :-)

Link to comment
https://www.sau.com.au/forums/topic/262384-pinging/#findComment-4495952
Share on other sites

Ended up being fuel. I refilled with BP Ultimate and took it for a squirt and the pinging was gone.

I had bought the fuel filter and fuel pump before refilling so decided to change those anyway. Probably better to have new better stuff anyway.

Still gonna get it tuned though as I have been hanging to do it for a while and this just gave me the push I needed to book it in.

Link to comment
https://www.sau.com.au/forums/topic/262384-pinging/#findComment-4505202
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah. Nah. This is why I said My bold for my double emphasis. We're not talking about cars tuned to the edge of det here. We're talking about normal cars. Flame propagation speed and the amount of energy re
    • You don't have an R34 service manual for the body do you? Have found plenty for the engine and drivetrain but nothing else
    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
×
×
  • Create New...