Jump to content
SAU Community

Recommended Posts

Well gatton comes and goes about this time every year and I have to admitt, I was a little disapointed not to see Mark and Russ there. I was hoping the would be biving the new 34 a shake down before Superlap.... Ohwell, was not to be. Brad Botcher took out the event dipping into the 34 sec mark with 1of his R32 gtr's along with Ray Vanderce (spelling?) in his Skelta, a rwd supercharged registered prototype thing. Botcher again with his other 32 GTR in the 35'sallong with another Skelta thing. At 36.1 was Danny Mischock and his amazing mk II escort bullett which I was chasing all weekend pulling in next in line at 36.6. Steve Voight had a #18 shell AU V8 Supercar which was in my class with a best of 36.8.

All in all We (Sara and I) had a good weekend. She was the fastest rwd car on true street tyres @ 41.1 and 2nd out of the girls. I won my class, 2nd rwd tin top and 6th outright.

I was having a fiddle with some footage I got from my car, 1st run sunday morning. the camera was in Sara's car the rest of the weekend for coahcing purpouses. Paid off for her too.

Edited by Noddy
Link to comment
https://www.sau.com.au/forums/topic/262434-gatton-sprints-2009/
Share on other sites

FYI...

I think the most impressive effort was the fact that Brad's full weight (1560kg without driver) legally registered R32 (car 131) running street legal tyres ran a 35.33sec making it the fastest ever street registered GTR to lap the Gatton track.

The unregistered one (car 135) ran a 34.068sec on factory brakes which were really letting it down. Both cars running pump United Boost98 fuel which only cost $1.17/Lt that weekend.

Both times done on cold tyres and brakes, maybe next time he'll double enter a car so the first driver can get everything nice and up to temp for when he takes it around which history has shown us is good for 1.0 - 1.5 sec off your time at this track.

FYI...

I think the most impressive effort was the fact that Brad's full weight (1560kg without driver) legally registered R32 (car 131) running street legal tyres ran a 35.33sec making it the fastest ever street registered GTR to lap the Gatton track.

There is no way on this earth would I drive any where near a cop on the street with that exhaust and expect to come away without a list of defects as long as my arm. The thing makes 660rwhp through a holinger box (sequential I think) so it dam well should be in the low 35's. My 33 gtst has less than 1/2 the power and 1/2 the number of driving wheels and only 1.3 sec behind. My brakes are also std calipers, virtuly the same as on the gtr and to be honest if his pads were going off with 4 applications..... there crap pads.

It is still a very impressive time, but put into perspective, it's a balls out pig.

Edited by Noddy
There is no way on this earth would I drive any where near a cop on the street with that exhaust and expect to come away without a list of defects as long as my arm. The thing makes 660rwhp through a holinger box (sequential I think) so it dam well should be in the low 35's. My 33 gtst has less than 1/2 the power and 1/2 the number of driving wheels and only 1.3 sec behind. My brakes are also std calipers, virtuly the same as on the gtr and to be honest if his pads were going off with 4 applications..... there crap pads.

It is still a very impressive time, but put into perspective, it's a balls out pig.

660 at the treads through a 3'' system with cat , resonater and full muffler that passes a no load noise test at 5100 rpm ... yeah rite!... maybe 450 is more like it .

defect list as long as your arm ???? ..... name them !

I am sorry if my earlier post offended any one and I have explaind my response to V8 eta. Sorry if the figures qouted to me on the weekend were incorrect. I was under the impression I was takling to the owner and getting infomation first hand.

I may have been talking to a sales person or a total stranger just making stuff up.

Again my appolagies

Edited by Noddy

Just to stir it up a bit.

I had a disapointing weekend hoping to get in to the Silver 37.5 group but after not being able to get adequete heat in my slicks on Sat so I swapped to kumho's new KU36 road tyre. Not even a semi and has a tread wear rating of 190 and was able to drop my time to 38.2. So happy that still in 39sec club again but could have done better.

In regards to Brad Bottcher. Was always expecting him/you to be at the pointy end of the scale with both cars. V8ETA i imagine would have a few defects flicked at it if mr plod was to pull it up (clearing them may be a diffrent story) In regards to 660-450whpit does not matter as it is all way going to be hard for my fully interior /factory paneled 1250kg + driver, 270whp 180sx to keep up just like it was with the 300whp 700kg skeltas in my class. But at the end of the day its fun trying. and we wil give it another go at marybough with all you guys including you mr smith I imagine. ( sent your entries in yet?)

And noddy well done! on the 36.6. made me try a bit harder because we are normaly with in half a sec of each other my way or yours at events.

Fun event and i'll be there next year!

think you may need a history lesson brad, mark was driver one last year on all occasions if you bothered to look. i was the second driver so i got the heated braked and tyres and he still set the fastest time and broke his own record.

anyway wish i had been there watching instead of stuck under a car, well done to you guys great result.

well done to you too noddy ! hope to see ya at morgan park.

think you may need a history lesson brad, mark was driver one last year on all occasions if you bothered to look. i was the second driver so i got the heated braked and tyres and he still set the fastest time and broke his own record.

anyway wish i had been there watching instead of stuck under a car, well done to you guys great result.

well done to you too noddy ! hope to see ya at morgan park.

hmmm now who said anything about you and mark ?? but now that you mention it what was his previous record ?.

p.s ... bait well taken russ :D

Edited by V8 ETA

Getting back on track, Gatton that is, I'm not a big fan of the average time thing. It included the first lap which is traditionaly not included so ppl don't over do it and have a very short weekend. Even thought it doesnt change the class or catagory positions, it did put my official average lap time down some 10 places.

In the weeks leading up to the event I had been working very hard along with my tuner to get a GTR manifold to work better for us in the bottom end of the rev range. Wed arvo after work I pulled pin on the GTR manifold and started looking for some stock runners, which I found in Bris. Picked them up that night, a 4 hour+ round trip with peak hour traffic. Thursday evening was on a mill making some mods for GTR inj and so on. Friday morning it all got put together and winched on to the truck. Stopped at my tuner and we uploaded the relivent mapping and kept on going to gattonso we could get through scruitnerring and setting up a pit. First run off the line pulling 2nd gear..... pipe pops off. 44 sec lap and my averag is shot. "Not to worry" I thought, "it doesn,t count". How wrong was I.

Getting back on track, Gatton that is, I'm not a big fan of the average time thing. It included the first lap which is traditionaly not included so ppl don't over do it and have a very short weekend. Even thought it doesnt change the class or catagory positions, it did put my official average lap time down some 10 places.

In the weeks leading up to the event I had been working very hard along with my tuner to get a GTR manifold to work better for us in the bottom end of the rev range. Wed arvo after work I pulled pin on the GTR manifold and started looking for some stock runners, which I found in Bris. Picked them up that night, a 4 hour+ round trip with peak hour traffic. Thursday evening was on a mill making some mods for GTR inj and so on. Friday morning it all got put together and winched on to the truck. Stopped at my tuner and we uploaded the relivent mapping and kept on going to gattonso we could get through scruitnerring and setting up a pit. First run off the line pulling 2nd gear..... pipe pops off. 44 sec lap and my averag is shot. "Not to worry" I thought, "it doesn,t count". How wrong was I.

yeah that sucks , i'm not real keen on the every run counts towards a total either .. you should be able to drop at least 2 runs or something

i know what your saying about popping a cooler pipe , i got a dnf because of it wich reminds me i borrowed 2 x motorbike tie downs out there to keep my pipes together if anyone knows who they are send me there address so as i can send them back

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
    • Did you use an electronic speedo drive? Does you speedometer read all the way to 180km?
×
×
  • Create New...