Jump to content
SAU Community

Recommended Posts

Here they are, consider aftermarket bolt-in or you may just have some contamination, very fine tolerances inside the pump. Just the act of removing it, draining it and cleaning filter may fix it.

post-780-1238314500_thumb.jpg

Here they are, consider aftermarket bolt-in or you may just have some contamination, very fine tolerances inside the pump. Just the act of removing it, draining it and cleaning filter may fix it.

I would consider after market but what should I get ?, Would prefer something that bolts straight in.

Thanks for your help

I think the factory pump will put you close to $1k mark. The M35 uses the same pump as the V35 skyline according to FAST. If you check ebay and heaps of US sites there are many aftermarket pumps available for the G35 infinity (same as V35), dephi, walbro and bosch etc, these are for 3.5 NA not your 2.5 turbo, so might take some more research.

I would consider after market but what should I get ?, Would prefer something that bolts straight in.

Thanks for your help

If you pay someone to install a Walbro or a Bosch you will probably still come out cheaper than a stocker and have a better pump as well (but as Simon says, change/clean your filters first).
If you pay someone to install a Walbro or a Bosch you will probably still come out cheaper than a stocker and have a better pump as well (but as Simon says, change/clean your filters first).

Thanks for that I will do so, DO you know if the Walbro pumps are fitted inside the tank like the standard ones ?.

Another thing I noticed with the M35 is that the pump has 4 wires controlling it and that it is variable speed.

The extra wires are not the sender unit as this is mounted on the other side of the tank.

Thanks for that I will do so, DO you know if the Walbro pumps are fitted inside the tank like the standard ones ?.

Another thing I noticed with the M35 is that the pump has 4 wires controlling it and that it is variable speed.

The extra wires are not the sender unit as this is mounted on the other side of the tank.

I did some more research on the weekend end and I stand corrected.

It looks like one side is the Fuel pump, the other side is the fuel gauge.

Cheers

Andy

Thanks for that I will do so, DO you know if the Walbro pumps are fitted inside the tank like the standard ones ?.

Another thing I noticed with the M35 is that the pump has 4 wires controlling it and that it is variable speed.

The extra wires are not the sender unit as this is mounted on the other side of the tank.

My Walbro is intank. Bosch do an intank and outside pump - probably easier to stick with the intank. Haven't sussed out the wiring yet . Apparently S1 has two power levels to pump maybe yours is variable. I plan to change mine to full voltage (13.8v) as it seems there is normally a resistor in place and walbro need full current to perform to max. I will have to do some more research (plently of info in general skyline pages).

My Walbro is intank. Bosch do an intank and outside pump - probably easier to stick with the intank. Haven't sussed out the wiring yet . Apparently S1 has two power levels to pump maybe yours is variable. I plan to change mine to full voltage (13.8v) as it seems there is normally a resistor in place and walbro need full current to perform to max. I will have to do some more research (plently of info in general skyline pages).

I checked it out today and removed the original pump and its a 2-wire job where the other two are for the fuel level. When i measure the voltage @ idle its 13.8 V all the way to redline so no variable fuel stuff.

Ordered a Walbro intank so will put this in when it gets here.

FYI nissan wanted $450 for the pump.

I checked it out today and removed the original pump and its a 2-wire job where the other two are for the fuel level. When i measure the voltage @ idle its 13.8 V all the way to redline so no variable fuel stuff.

Ordered a Walbro intank so will put this in when it gets here.

FYI nissan wanted $450 for the pump.

Which Walbro did you order (part#)?

Or was it for a VQ35?

Edited by iamhe77
Which Walbro did you order (part#)?

Or was it for a VQ35?

It was the GSS342, used in G35 & 350Z. Had a better spec than the stock nissan one, I guess Ill have to wait and see if the results are worth it. I guess it has to be since the stocker is shot.

AFAIK they are 255L/hour hi-pressure??

the stock FPR should take care of any additional pressure

Thats right, Not sure what the fuel pressure is on VQ25 but hopefully it should work ok.

Might be a little richer though and need a tune.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...