Jump to content
SAU Community

Recommended Posts

After waiting more than 2 months to receive my covers, I finally have them but now need the money for car servicing .. too many bills to pay so can't afford to keep them.

They're made by 'proseat' down in Melbourne and they're CREME in colour with black double stitching and nismo logos (stitched on not embossed). Includes front seats incl. head rests, rear seats and extra material for the door trims (front and back).

I paid $665 (with a discount thanks to a GB) and had to wait more than 2 months for them. They're yours for $600 incl shipping but I'd preffer a local buyer (Sydney) as it's a bulky item to send.

Please no lowball offers, price is set at $600. If you want to pay $700+ and wait 2 months, be my guest. These are brand new and haven't been fitted yet. To suit an R34 GT-T ONLY.

PM me or if you're local and would like to inspect before purchasing give me a call on 0413337146 Please don't waste my time if you just want to 'inspect' and not buy as I'm very busy.

Any general questions, ask here please.

Denis

post-49910-1238384800_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/263337-r34-gt-t-leatherette-seat-covers/
Share on other sites

Up for sale still. Previous buyer bailed out it seems.

Guys price is FIRM.

$600 is still $100 under retail price and the covers are brand new and you don't have to wait up to 3 months for them, you can have them in 2 days.

price is firm, if you can't afford it please don't make silly offers thanks.

i can afford the asked price but im not paying retail for something that is 2nd hand.

ill offer 500 delivered to melbourne

have cash now ready to go.

it's not 2nd hand, they arrived at my place a week ago after a 2+ month wait. They haven't been fitted or anything, so they are NEW. Guys, price is firm, if you don't like it, please order from the supplier directly.

I am NOT desperate to sell these so don't try and lowball me when I've said multiple times that price is firm. If I can't sell them at a almost $100 loss I'll just keep them and fit them when I have the time and money.

Edited by Delta Force
  • 2 weeks later...

tbh I'd prefer a local (sydney) buyer as its very bulky and a pita to send so I'll leave this up for a while longer.. I'll let you know if it doesnt sell

tbh I'd prefer a local (sydney) buyer as its very bulky and a pita to send so I'll leave this up for a while longer.. I'll let you know if it doesnt sell

yeah dw dude. I went to proseat today and ordered it to be custom made and installed for less then what your asking. thanks any way :)

I somehow doubt that since I've been quoted $1400 for the same covers to be installed by Proseat. The cost of the covers itself and extra materials is more than $700 unless the price magically halved overnight or something. Their installation/labor costs are still atleast $700 as I've been quoted by 2 upholsterers here in Syd ($600 and $700) for install.

But if you really did get 'custom covers' installed for $700 that's a really good price and good for you. I'd be a bit curious how you got that price though when they've quoted me $1400 for the same.

Edit: just a word of warning about Proseat though ... It's been more than 3 months now and they still haven't given me the extra material I paid for. Phone ringing off the hook and emails not replied. There might be something dodgy going on and I'd be a bit suspicious about that price. I wouldn't pay anything upfront if I were you - just a friendly warning.

Edited by Delta Force
  • 3 weeks later...

extra material is in so it's all ready to go .. I had a lot of PMs and calls about it but no buyer yet. What did everyone blow their $K900 already ?? :(

Cmon guys ..brand new covers, front and back and extra material (2sq metres) for the inserts at front and rear. Same covers cost $700+ from the supplier with a farken wait of several months!

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...