Jump to content
SAU Community

Recommended Posts

  • Replies 85
  • Created
  • Last Reply

Top Posters In This Topic

I'm needing a passenger side wheel well liner (left guard liner). Does that come with the mounting hardware (clips and screws?) Also, the HKS piping, are we talking the intercooler piping? turbo side piping? Filters and elbows?

  • 2 weeks later...
Parting out White R32 GTR. Currently have the front half as a half cut, and the rest is in parts

Fell off road on driver side RH Qtr panel hit bad, can cut off good left hand quarter panel .

Items listed below: See link for pics

Front cut includes 76000 km Motor/Box/Loom/ECU/brake master/Clutch master and slave/new twin plate clutch/ dumps/dash/turbos and just about everything you'll find in an engine bay, except cooler and piping. - $6000 or near offer. DEPOSIT TAKEN on FRONT CUT

Fuel pump $140

Fuel Door $40

Fuel tank $40 SOLD

Drivers Door (Trim+Cont) $50 SOLD

Passenger Door (complete) $150

Rear Reo Bar $50

Rear bumper $200

Rear Tail lights Pair $120 SOLD

Rear boot lid (wing + badges) $250 SOLD

Rear reverse lights Pair $30 SOLD

GTR Steering Wheels x2 $100ea SOLD and SOLD

Left Front Indicator $90 SOLD

Fog Lights (Pair) $75

Factory Cold air box $80 SOLD

GTR Grill $130 SOLD

Front Reo Bar $50 SOLD

Front Bumper (2x cracks) $200 SOLD

Twin Factory Dumps $5 SOLD

Blitz FMIC $250 SOLD

HKS Piping (RB26DETT) $150 SOLD

Side Skirts $150

Set of Side Pods $150

Right F guard (damaged) $250

Left F guard (perfect) $400

Pair Headlights $350

Left Front Guard Liner (perfect) $80

Rear GTR coilovers $150

Front Trust Coilovers $200

Aluminium Bonnet $300

Rear seats $10 SOLD

Glove box $10

Factory Gear Knob $2 SOLD

Momo gear knob $5 SOLD

Rear cradle $400 Deposit taken

Tailshaft $200 SOLD

Rear callipers, rotors $400 Deposit taken

Front callipers, rotors $500 SOLD

Rear sway bar $200 SOLD

Front sway bar $100

Front LCA (pair) $200

Front Upper Arms $100

Seat belts x4 $80 SOLD

R32 GTR Diff $900 Deposit taken

Radiator $175. SOLD

PICTURES : http://img291.imageshack.us/gal.php?g=dsc01036.jpg

Either PM me or call on 0403 071 294.

Located in The Gap, Brisbane. Would prefer pick-ups, but talk to me. Bulk buy discounts a specialty

Thanks

Radiator is SOLD.

Bonnet is the one in the pics, but very hard to get a pic showing damage, i will need someone who's OK at ally work to repair.

Bonnet closes and locks . Best to come and look at it ( Adelaide's a bit of a drive but!), sides postage/freight to SA will be a killer!

Hi mate.. intrested in the reo bar and the grille

does the grille still have the clips ??

and the reo bar looks a little twisted... wat's the condition ?

and can u post a better pic please

PM me.. thanks

  • 2 weeks later...
Hi mate.. intrested in the reo bar and the grille

does the grille still have the clips ??

and the reo bar looks a little twisted... wat's the condition ?

and can u post a better pic please

PM me.. thanks

Sorry reo, front bar and grille all been sold

Dude that put deposit on front cut, box, diff cradle rear brakes and front knuckles has pulled out.

So

Front cut rb26dett motor complete/g/box/loom/ecu now back for sale $6000

Diff R32 gtr LSD with shafts ATTESSA and pumps $900

cradle with brake backing plates all arms $400

Rear brake rotors (almost new cond!) and calipers, $250

Front knuckles with hubs, ABS rings and sensors, cv shafts $250 the pair

Upper eccentric bushed adjustable front camber arms $150 pair

Front lower radius arms with eccentric adjustable bushes $150 pair

Lower control arms with very tight ball jionts, ( car had done 76000kms) $200 pair

do you happen to have rear backing plates for sale?

Yes but thay are all on the complete cradle

$400

Can supply rotors and calipers as well $250

does the gtr side skirts and side pods fit the gtst ??

If the GTST is around 1993 year model, and happens to be a two door, like a gtr, then yes they will fit.

They are some sort of flexible thick plastic that was fitted as standard to the r32 gtr model by Nissan.

If it's a four door, then they may need some trimming (easy with a small grinder like a dremel or 4"jobbie)

And yes, they are all still available.

I can do a better price if youy want both the full set of pods, and, the side skirts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...