Jump to content
SAU Community

Where To Buy This Intercooler ?

Johnney_aussie

By Johnney_aussie,
in South Australia

 Share

Recommended Posts

Johnney_aussie Enthusiast

Johnney_aussie

Posted
Posted

Within the up coming weeks im installing a few bits and pieces on my 33 and i was wondering if there are any stores in adelaide who sells the Cooling-Pro Stealth Series Intercooler from Justjap heres the link http://justjap.com/store/product.php?produ...at=0&page=1 or any store that sells this type of cooler. Thanks from Nathan.

Link to comment
https://www.sau.com.au/forums/topic/263567-where-to-buy-this-intercooler/
Share on other sites
RubyRS4 Grand Master

RubyRS4

Posted
Posted
Within the up coming weeks im installing a few bits and pieces on my 33 and i was wondering if there are any stores in adelaide who sells the Cooling-Pro Stealth Series Intercooler from Justjap heres the link http://justjap.com/store/product.php?produ...at=0&page=1 or any store that sells this type of cooler. Thanks from Nathan.

That specific cooler I haven't noticed being sold my any Adelaide shops. Tho I think ISC may?

I want to nab one soon for my Stagea ... something that looks better with the new bar.

Krishy Grand Master

Krishy

Posted
Posted

i think ARC or Blitz make those types of coolers as well

and you should be able to get them through places like Autobarn or some of the other import places

but expect to pay a bit more.....

Carbon 34 Grand Master

Carbon 34

Posted
Posted

pretty sure we have a want to buy section and a wasteland for these questions, but I need one too, Group buy..lol

need a GTT one with both inlet and outlet on same side, or something like that one. autobarn fail, cost too much for this one

synergy fail, way way too much, 1800 for blitz installed, ya right..lol

Marlin Grand Master

Marlin

Posted
Posted
I want one of them for my R32, but they don't make them for it and I don't know if it would fit.. :)

I have an R34 GTT cooler and piping mate that I had modded to fit into my 32 mate if you want it? PM if interested. Also a spare R34 GTT cooler not modded. Both in great shape.

Car made 210 RWKW with it so not shabby.

Johnney_aussie Enthusiast

Johnney_aussie

Posted
  • Author
Posted

Yeah thanks boys, I think Justjap is my only option and probably cheaper than anywhere else. This question may have been for the wasteland but i lose track of stuff on there too much bs on there.

Johnney_aussie Enthusiast

Johnney_aussie

Posted
  • Author
Posted
i have one of these coolers from justjap, they are decent quality and very easy to install. good bang for buck item

Are they worth keeping on the car for a long time ? Would you put them up with other products like Greddy cooler ?

Luke_ENR34 Grand Master

Luke_ENR34

Posted
Posted

hey mate, I would be going with a Greddy LS cooler. Bolt straight up and dont have that gay pipe underneath.

My mate has a Blitz one and hits that pipe so much. Basically needs a new cooler now.

Krishy Grand Master

Krishy

Posted
Posted
hey mate, I would be going with a Greddy LS cooler. Bolt straight up and dont have that gay pipe underneath.

My mate has a Blitz one and hits that pipe so much. Basically needs a new cooler now.

I can definately vouch for that

Luciano Veteran

Luciano

Posted
Posted
Are they worth keeping on the car for a long time ? Would you put them up with other products like Greddy cooler ?

at the end of the day it does the job pretty well, and is a very good cooler kit for its price.

If you are going to buy a Greddy one, you know you are buying a quality item - it'll always be voted better of the two kits.

I bought the justjap one as i wanted to use of the standard ic plumbing in the engine bay. no cutting holes anywhere for pipes, no extra piping under the bonnet at all, no removal of my washer bottle. Simply less stuffing around.

yeah the 'gay pipe underneath' does sit a little low. just got to be a little careful, that is all. If you can drive through dips and reverse out of risky driveways in the right manner, you will be fine. carelessness will destroy these fmic kits, end of story.

Johnney_aussie Enthusiast

Johnney_aussie

Posted
  • Author
Posted
at the end of the day it does the job pretty well, and is a very good cooler kit for its price.

If you are going to buy a Greddy one, you know you are buying a quality item - it'll always be voted better of the two kits.

I bought the justjap one as i wanted to use of the standard ic plumbing in the engine bay. no cutting holes anywhere for pipes, no extra piping under the bonnet at all, no removal of my washer bottle. Simply less stuffing around.

yeah the 'gay pipe underneath' does sit a little low. just got to be a little careful, that is all. If you can drive through dips and reverse out of risky driveways in the right manner, you will be fine. carelessness will destroy these fmic kits, end of story.

Yeah exactly thats why i want this type of cooler, Even if i do that have so called GAY pipe going underneath.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Bit wet, but YUMMY
    • GTSBoy
      Pops when backing off throttle, rough-ish sound through rev range.

      By GTSBoy · Posted

      Keeping in mind that I am currently getting flat 10 L/100km on my RB25DET, which means >>500km/tank. I would test this car for vacuum leaks, check codes and AFM signal with NissDataScan as D says, check plugs, do a compression check while they are out.
    • Duncan
      Pops when backing off throttle, rough-ish sound through rev range.

      By Duncan · Posted

      It is hard to be specific half way across the world...but it *seems* like it might have a minor issue. Is the idle stable and does it rev smoothly? I would not expect any pops out of what I am assuming is a standard ECU, standard tune, standard exhaust. You can use Nissan Data Scan to find out exactly what is happening when it runs, the cable/software is reasonably affordable if you are not planning on changing the ECU (which hopefully you are not with an NA skyline) BTW your mileage may not be that far off, these are heavy old tech cars, and being NA might mean you use a heavy foot to keep up with traffic....
    • AdiR34
      Pops when backing off throttle, rough-ish sound through rev range.

      By AdiR34 · Posted

      Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
    • Duncan
      Looking for a part number for this part here

      By Duncan · Posted

      So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
×
×
  • Create New...