Jump to content
SAU Community

Recommended Posts

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Found this ebay shop:

http://stores.ebay.com.au/teamozimports

ADR approved helmets, only 50 bucks + postage. You will pay an extra $15 or so for express postage.

I also paid an extra $10 for a tinted visor, not that I'll need it but hey it's 10 bucks.

Now before any of you bikers get fired up and give me some good advice about cheap helmets, I know the price reflects the quality and all that, if I was on a motorbike I'd fork out for a good Shoei, but I'm IN the car, and it's got airbags, cheap helmet will do me for now. Cheers for caring about me though :D

EDIT:

and I paid through paypal hooked into my savings account. Visa debit baby, gotta love it :D

Edited by medman2damax

^ -1 dude

paypal is instant. The seller has already got my payment and messaged me to say he is going to the post office now.

Express post should arrive tomorrow, latest friday, assuming Australia post can read an address.

Its a grip day.

Yeah i got vy commie coil packs waiting to go in, should fix the misfiring. Its a cheap fix over splitfires but should work till i save up for some decent gear. They're said to handle up to 28psi boost which is nowhere near what I'm running so I'm hoping it works out.

Whats wrong with your car? Mines worse than yours + auto :P

its defected for once....dont have a trailer atm to chuck it on and take it to the tracks

suspension is very very soft....investing in some soon

doesnt really like warm days and recently been knocking a bit....think it needs a touch up tune

apart from that its not too bad

Last prac day i went to had about 5 sessions of about 6-7 laps, it just depends if there are things like oil spills on the track etc etc.

You dont have to do every lap of the session, if your car overheats you can pull into the pits or drive a bit slower just dont get in the way of other cars. When i come into the pits i do a few very slow laps of the pits to help the car cool and dont hold with your foot on the brake's while they are hot.

Overtaking is allowed on the straights, but is not permitted under brakes.

I recommend that you have new brake pads or near new, as last prac day i had to drive home with no rear pads left ;) and take a tyre pressure gauge as you will need to adjust the pressure when the tyre's are hot. Pressures will jump about 4-6 psi or more.

Edited by DSTROY

Cheers for the info dstroy.

I'm going assuming my helmet arrives in time, got a mate with an evo who will probably come as well. Do we need to register or book a spot somehere? or do we just show up?

got a fire extinguisher?

pretty sure you need one mounted within reach from drivers seat.

and for me things are starting to look like i might be missing this one, called a few shops up, everyone needs to order the discs coz no one stocks em (down south anyways) and im not taking it without decent brakes :)

ffs.. was really looking forward to this.

can anyone confirm the fire extinguisher thing?

How's this for brake upgrades:

http://www.uniqueautosports.com/pricelists...ist_braking.htm

Edited by medman2damax

www.mallala.com/startyourengines

CARS & KARTS PRACTICE INSTRUCTIONS

For competition cars with a CAMS logbook, drivers must wear the same helmet, apparel & boots as required for racing.

Non Competition drivers need a Helmet with AS1698 APPROVAL by CAMS, clothing (non synthetic) with full length sleeves and leg coverage.

CAMS LICENCES MUST BE SHOWN AT ALL PRACTICE SESSIONS.

The practice fee for 2008 is $100.00.

* Nothing mentioned, am im pretty sure you dont need an extinguisher on practise days

Helmet just arrived....... matches my car.

post-52381-1238658525_thumb.jpg

Looks like we have a green light for track day.

if anyone is keen to drive up there together I will be meeting at BP west Tce at 3:15 on the Saturday, fuel up and check tyres, head out at 3:30 and we should be there before 4:30.

Should be meeting at least 1 other car there, maybe 2.

If you're keen PM me to exchange mobile numbers.

My car is ready to go, going to put some new thicker oil in (15w-40) tomorrow. Shame I'll be running with no boost control (aka stock actuator pressure 10psi) with a very conservative tune (EBC let go on the dyno, tune not finished), boost controller is going back to the manufacturer to be replaced.

if anyone is keen to drive up there together I will be meeting at BP west Tce at 3:15 on the Saturday, fuel up and check tyres, head out at 3:30 and we should be there before 4:30.

Aren't open track days just 10am to 5pm (opening at 8ish), 4:30am is quite early or 4:30pm quite late (unless i'm completely wrong about open grip days running at night as well)

Aren't open track days just 10am to 5pm (opening at 8ish), 4:30am is quite early or 4:30pm quite late (unless i'm completely wrong about open grip days running at night as well)

Your right, grip prac days are day only as far as i know.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...