Jump to content
SAU Community

Recommended Posts

Hi, just selling a range of parts to suit an R32 GTR, these parts were on the car which made 240awkw with this set up.

I have 2 x T25 turbos (I think)

specs of the turbos are,

M24 Garrett, 0.53 inlet and 0.48 on the exhaust side

The number on the id plate of the turbos read T702987-3

Turbos have done about 30,000k one has slight shaft movement and the other has virtually none. Both spin freely and were in perect working order when removed from car, only changed due to upgrade. I was told that these turbos are the standard item fitted to the R34GTR's. I can tell you that 240kwatw is about all you will get out of these turbos, they have vertually no lag and are very strong through the midrange, but they do run out of steem up top. By about 6000rpm in third gear I noticed the power flatten out. Car ran mid 12s with these turbos. They are a good upgrade from the standard 32/33 gtr turbos as they are steel wheel, not ceramic so they wont break.

After $400ono

.

Also have standard R32 GTR intercooler $250ono

.

Turbosmart 2 stage boost controller $80ono

.

Standard R32 GTR injectors and fuel pressure regulator. Make an offer?

Injectors need service.

.

8 x standard GTR coil packs. Make an offer?

The two extra came with the car when I bought it, the origional 6, at least one is faulty, car had a miss with these fitted, dont know if there is a way you can check to see which ones are good.

.

R32 GTR Mines tuned ECU $200ono

.

EMS ECU with wireing harness, this was piggybacked to the origional ECU in my car. This is an old model EMS but might be useful to someone,

$250ono

.

Origional GTR intercooler pipeing as shown in pics, $40

.

Apexi pod filters attached to standard air flow metres. $100

Air flow metres appear in good nick dont know how to check them and they were never functional in my car as it always ran map sensors in the time I have owned it.

.

Cusco front strut brace, $60

.

Blitz to atmosphere BOV with custom made (looks abit dodgy but works) 2in adaptor. $80ono.

.

Items are located at Minchinbury, in Sydneys west, Im a stones throw from WSID. Im happy to post the smaller items at the buyer expense, the larger ones might be too expensive but Im happy to try and get a price for you.

.

Any questions or if you are interested in anything, just give me a call,

Moray, ph: 0414 355 383

post-42702-1238936073_thumb.jpg

post-42702-1238936181_thumb.jpg

post-42702-1238936241_thumb.jpg

post-42702-1238936292_thumb.jpg

post-42702-1238936371_thumb.jpg

post-42702-1238936439_thumb.jpg

post-42702-1238936648_thumb.jpg

post-42702-1238936778_thumb.jpg

post-42702-1238936995_thumb.jpg

post-42702-1238937117_thumb.jpg

post-42702-1238937059_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/264330-r32-gtr-parts/
Share on other sites

Hi, just selling a range of parts to suit an R32 GTR, these parts were on the car which made 240awkw with this set up.

Standard R32 GTR injectors and fuel pressure regulator. Make an offer?

Injectors need service..

What are you thinking for these?

Ones in good nick go for $200ish or....

Link to comment
https://www.sau.com.au/forums/topic/264330-r32-gtr-parts/#findComment-4520898
Share on other sites

hi, pretty interest in boost controller

is that a Dual stage one? how about the condition, and workin order? any faulty

cheers

Boost controller was in full working order when removed from car, has since been kept wrapped and protected. SO should be in full working order, these are pretty basic items, cant imagine having any problems with them, also comes with red boost switch. The switch changes from 1st setting to second setting, so yes it is a duel stage item.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/264330-r32-gtr-parts/#findComment-4521445
Share on other sites

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...