Jump to content
SAU Community

Recommended Posts

Location - Melbourne

I have owned the car for 4 years now and its time to move on and sell my pride and joy. Unfortunately commitments have changed and i don't get to spend enough time driving my car. This car will not disappoint it makes awesome power and handles great!! The car is maintained regularly with a service at least every 5000km, along with being detailed on a regular basis.

R33 1993 Series 1 GTS-T

Looking for - $23,5000 but reasonable offers will be considered.

Original 174,000km Only done 65,000km Since Engine Rebuild

Making 310kw on 20psi @ RE Customs

Fresh custom paint job

Custom Front Banana Bar

Side skirts and rear pods

Custom rear Wing

White powder coated 18" Rims

Custom Number Plates

Remote Paging Alarm

Engineered 18x265x35 Rears & 18x235x45 Front Wheels - Legal 18's

Adjustable Tein Suspension

Upgraded bushes

Bendix ultimate pads

Greedy Intake plenum

Garret 3076 High Mount turbo

Dual Flow Fuel Rail

GTR injectors

6 Boost Exhaust Manifold

Forged Pistons

Power FC

Blitz Dual Stage Boost Controller

Mspec Radiator

Nismo Thermo

New head gasket

Aftermarket Throttle body

Front mount Intercooler with custom pipes

Twin plate clutch

Lightened flywheel

Turbo back exhaust

Bosh 040 fuel pump

Shimmed Diff

Nismo Short Shifter

Momo racing Steering wheel

Colour coded gear surround

Colour coded hand break surround

Carbon Fiber inserts to doors

300km/h Speedo - White

Alpine Mp3 Head unit Car stereo

2 x 6â"Rear Speaker

2 x 6" Front Splits

1 x 12" Alpine S-Type Sub

1 x 600 Watt Amp Powering the Speakers

1 x Alpine 12V Amp Powering the Sub.

This entire car is an awesome package and is well worth every dollar for the enjoyment to be had! The car has a very recent and extremely well maintained paint job which will impress all along with white powder coated rims. This car not only impresses people from its looks but also its power.

The car has been displayed at The Auto Salon GP Along with the 2006 Auto Salon Semi finals.

Please no joy riders only serious buyers.

Contact - Matt

Mobile - 0407 919 918

Email - [email protected]

Happy to post more pics if people would like to see more.

post-11799-1239245940_thumb.jpg

post-11799-1239246198_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/264830-yellow-r33-for-sale/
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...