Jump to content
SAU Community

Recommended Posts

Ok so I tried to post it here but I don't really know how to get it to format properly.

As such I have posted it as pdf format.

Further information on any of the events I have posted can be found at the following links.

WASCC

MC Motorsport

No Limits Car Club

Any questions queries etc then feel free to pm/post here.

Anyone who wants to add anything then also put that here.

I apologise if any information is wrong, I did the best I could to make it as accurate as possible.

Could we get this stickied?

Microsoft_Word___Motorsport_Calender.pdf

Link to comment
https://www.sau.com.au/forums/topic/265369-2009-motorsport-calender/
Share on other sites

Hey guys,

The Tuning days at Barbs cost $50 and the Drift Practice nights are $60.

I'll update the pdf and repost it tomorrow or later tonight.

The tuning days just allow you onto the track to drive around. No instructor or anything. They are there so you can setup your suspension etc.

  • 1 month later...
Hey guys,

The Tuning days at Barbs cost $50 and the Drift Practice nights are $60.

I'll update the pdf and repost it tomorrow or later tonight.

The tuning days just allow you onto the track to drive around. No instructor or anything. They are there so you can setup your suspension etc.

True ... ... .... to a point. WASCC's Tuning Days are also recognised by the club as a means of allowing members to take their street cars on to the track in controlled conditions. There are usually one or two instructors there who you can ask to come around with you. They are a great help! If you are unfamiliar with the track, or have not been for a while, a couple of laps with them is essential.

Cheers. :cheers:

Edited by MLCrisis
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...