Jump to content
SAU Community

Recommended Posts

Okay, hi everyone

My s1 r33 gtst does this wierd thing, usually at cold start, it will rev high, like around 1500 rpm to 2k and wont come down. Either it just stays there for a while and comes down to normal when the engine heats up or it never comes down. What i noticed is that if i turn the car off and then on again, it goes back to normal idle (regardless of how cold the engine is). This has happened for a long time and has me confused.

Ive changed the throttle body, IAC complete unit, TPS, cleared all vacuum leaks and changed the crank position sensor.

Also what i notice is that when its in this "high rev" mode it kinda sounds like nothing is blowing through my exhaust when down shifting and leaving it in gear. but when i turn it off and back on again (while driving), its fine!

thats as best as I could explain it, found it a bit hard to explain to mechanics, but yeah, if any ones experienced this before, how did you deal with it? and would it pose a big problem?

Any info would be great, thanks

Ben

Link to comment
https://www.sau.com.au/forums/topic/265372-is-this-wierd/
Share on other sites

<br />cold start.... till your thermostat closes... normal<br />
<br /><br /><br />

ok, I understand,, the only thing thats worrying me is my exhaust sounding like nothin comin through it.sometimes I have to turn it off and on a few times while driing for the car to sound normal. Sometimes happens as well when the engines warm. It would be normal, i'd turn it off, do something, come back and tun it on and it would do it agian. Maybe a blocked cat converter but i dunno

Link to comment
https://www.sau.com.au/forums/topic/265372-is-this-wierd/#findComment-4532974
Share on other sites

Well wat I have is not 100% like wat you are describing. The car revs high at about 1600-1800 rpm wen its cold and than it gradually drops down when the car is warm. Mechanic says that is due to big injectors and the way it's tuned on the Apexi Power FC. If you have big mods than I guess that what it is.

Link to comment
https://www.sau.com.au/forums/topic/265372-is-this-wierd/#findComment-4534881
Share on other sites

<br />Well wat I have is not 100% like wat you are describing. The car revs high at about 1600-1800 rpm wen its cold and than it gradually drops down when the car is warm. Mechanic says that is due to big injectors and the way it's tuned on the Apexi Power FC. If you have big mods than I guess that what it is.<br />
<br /><br /><br />

yeah mine does just that, ive never checked my injectors, i think my car used to have bogger mods but were taken off later. I need to get an ecu soon to sort this out

Link to comment
https://www.sau.com.au/forums/topic/265372-is-this-wierd/#findComment-4536005
Share on other sites

I think its normal. Mine Does that all the time. and my Exhaust doesnt sound loud no matter how much i Rev it. When the Engine gets Warm it sounds Louder and Sweet and Idles at 700RPM and very smooth too.

I asked the Guyz at the workshop and they sed its normal.

Link to comment
https://www.sau.com.au/forums/topic/265372-is-this-wierd/#findComment-4536096
Share on other sites

<br /><br /><br />

yeah mine does just that, ive never checked my injectors, i think my car used to have bogger mods but were taken off later. I need to get an ecu soon to sort this out

Well I hope you find the problem, If it is a problem, it could be just your injectors or something. Good Luck

Link to comment
https://www.sau.com.au/forums/topic/265372-is-this-wierd/#findComment-4537481
Share on other sites

Well I hope you find the problem, If it is a problem, it could be just your injectors or something. Good Luck

Ok well I'll get my injectors looked at. Also just wanted to ask. You know how the injectors are in line? now, just in front of them is this thing that looks like a but nut or something. Its got a connection coming out of it and that connection connects to the tps as well. What is that thing? And i think theres something wrong with it coz it constantly makes a ticking noise. Might this have anything to do with my problem?

Thanks a lot for the input guys

Link to comment
https://www.sau.com.au/forums/topic/265372-is-this-wierd/#findComment-4537908
Share on other sites

Ok well I'll get my injectors looked at. Also just wanted to ask. You know how the injectors are in line? now, just in front of them is this thing that looks like a but nut or something. Its got a connection coming out of it and that connection connects to the tps as well. What is that thing? And i think theres something wrong with it coz it constantly makes a ticking noise. Might this have anything to do with my problem?

Thanks a lot for the input guys

I'm honestly not sure, cause I got an RB25 NEO and the Injectors, and the layout is different.

Link to comment
https://www.sau.com.au/forums/topic/265372-is-this-wierd/#findComment-4542591
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
×
×
  • Create New...