Jump to content
SAU Community

Recommended Posts

  • Replies 143
  • Created
  • Last Reply

Top Posters In This Topic

Hmmm.. my suggestion is.. keep the original font of skyline. (just like that "rx8") then add something to it just like Riantos bro. ill make use or try incorporate the 350GT if the V35 somehow doesnt work out, not 100% sure about GTR look on the V's either. (thats just my point of view)..good experiment somehow. you need to mix some chemicals more for the perfect formulae =) peace.

if you really want that GTR look. replace the 35 to 350 and replace the V to GT.

Link to comment
https://www.sau.com.au/forums/topic/265500-v35-logo/#findComment-4535796
Share on other sites

Just a quick edit

But do you see what i'm trying to do? 35V

Hm, close but no cigar... this way it kinds of read: 35V, not V35.

Try swapping the V above the 35

and kind of intersecting design... you get an idea what I'm talking about??

and perhaps forget the whole

GT

R

kind of thing/idea because we all know V35 is NOT a GTR...

Link to comment
https://www.sau.com.au/forums/topic/265500-v35-logo/#findComment-4536089
Share on other sites

no no, im thinking a few kilowatts bro, but like he said, dyno is needed.

i like the one with the 350GT, hmm maybe trying out a few different fonts, not sold on the font thou....hmm since i hav no exams, ill try smthing out too, look out for this space!

Edited by sethaiyaar
Link to comment
https://www.sau.com.au/forums/topic/265500-v35-logo/#findComment-4538800
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...