Jump to content
SAU Community

Recommended Posts

I've searched around the forum and found an older Stag in the good old ACT but haven't found any mention of an M35. Or am I going to have to buy one sight unseen and un driven from the internet? :stupid:

And then get shocked at how big it is (seems lots of posts on here talk about how you can put a fridge in the back, just how big are these things?!

Link to comment
https://www.sau.com.au/forums/topic/265967-are-there-any-m35s-in-canberra/
Share on other sites

I've searched around the forum and found an older Stag in the good old ACT but haven't found any mention of an M35. Or am I going to have to buy one sight unseen and un driven from the internet? :stupid:

And then get shocked at how big it is (seems lots of posts on here talk about how you can put a fridge in the back, just how big are these things?!

Dimensions are listed here;

http://www.northshoreprestige.com.au/vehic...el=stagea#specs

The car is bigger that a Subaru Outback but only maginly longer and slightly wider.

yay! someone new! i've got an S2 RS4s, only ever seen one M35 in canberra but it had NSW plates. there are about 4 others C34s that i know of, 'the driver' has a white one but last i heard it was bent, there was another white one at trojan motorsport, a silver one that lives in gungahlin somewhere and i think there was a guy down southside with an S1. i also have a white one in my backyard in bits.

D.

yay! someone new! i've got an S2 RS4s, only ever seen one M35 in canberra but it had NSW plates. there are about 4 others C34s that i know of, 'the driver' has a white one but last i heard it was bent, there was another white one at trojan motorsport, a silver one that lives in gungahlin somewhere and i think there was a guy down southside with an S1. i also have a white one in my backyard in bits.

D.

Hi,

I have seen one S1 or S2, not sure which, once down here but never a M35. I've seen a couple of Legnums recently and looked into them on the net but am not sold on them as much as an M35 fromall the reading I've done.

I've bought a number of cars off the net but all I've driven before by either trying a friends, renting one or "test"driving one at a dealer.I'm almost ready to pull the trigger on a Stagea having never driven one (certain things stop me from travelling up to Sydney at the mo and I need to act now). Crazy? :down:

Edited by Houdini
Hi,

I have seen one S1 or S2, not sure which, once down here but never a M35. I've seen a couple of Legnums recently and looked into them on the net but am not sold on them as much as an M35 fromall the reading I've done.

I've bought a number of cars off the net but all I've driven before by either trying a friends, renting one or "test"driving one at a dealer.I'm almost ready to pull the trigger on a Stagea having never driven one (certain things stop me from travelling up to Sydney at the mo and I need to act now). Crazy? :P

Maybe us Sydney residents need to do a cruise to ACT :thumbsup:

I'd be in for it, not sure about the other m35's tho!

I could take ya for a spin, or are you more interested in buying?

I can tell you that you wouldn't regret it, it doesn't feel like a large car when you drive it, technically it's not really that large, slightly smaller than a Ford or Holden wagon (old version, the new version is around the same size or slightly smaller?)

I've bought a number of cars off the net but all I've driven before by either trying a friends, renting one or "test"driving one at a dealer.I'm almost ready to pull the trigger on a Stagea having never driven one (certain things stop me from travelling up to Sydney at the mo and I need to act now). Crazy? ;)

Nah, not crazy man...

I bought mine from Northshore Prestge (Sydney) 2 years ago over the net.

At the time, there was not even anyone on these forums that had one.

Leap of faith (plus I fell in love with it straight away), but thankfully the guys at Northshore Prestige were and still are VERY helpful.

Wouldn't change a thing... except I would have gotten the exhaust on straight away :P

Edited by iamhe77
Well some Canberra drivers coming out of the woodwork. No M35's showing up though and a NSW dealer swears there's a couple here. Canberra is a small place and I would've seen them :P . Where are you hiding?

Don't feel too bad about not having spotted them, there are many more in Sydney etc. and I've done 5000+ km's and I have only spotted WC34's!!

I've been too Sydney airport, around to La Perouse, Central Coast, Lithgow, Broke (via Old Putty Road).

They do a good job hiding, because mine hasn't been spotted and put on the "spot the stagea" forum yet ;)

yay! someone new! i've got an S2 RS4s, only ever seen one M35 in canberra but it had NSW plates. there are about 4 others C34s that i know of, 'the driver' has a white one but last i heard it was bent, there was another white one at trojan motorsport, a silver one that lives in gungahlin somewhere and i think there was a guy down southside with an S1. i also have a white one in my backyard in bits.

D.

I have a white S2 RS4. I work at Mitchell so its mainly parked out of site, but I get out and about a fair bit. The guys at Trojan do the work on mine - very good guys and excellent work. I have had mine for over 2 years and still going strong. The exhaust mods are the best thing to do for stageas, and I am sure the M35 is no different. I still have the SMIC on mine, so I enjoy the weather getting colder!

Nah, not crazy man...

I bought mine from Northshore Prestge (Sydney) 2 years ago over the net.

At the time, there was not even anyone on these forums that had one.

Leap of faith (plus I fell in love with it straight away), but thankfully the guys at Northshore Prestige were and still are VERY helpful.

Wouldn't change a thing... except I would have gotten the exhaust on straight away :P

What exhaust did you end up going with?

What exhaust did you end up going with?

Standard Dump (with pre-cat), Kakimoto front pipe (de-cat), Fujitsubo Legalis R exhaust.

Sounds bloody good and flows nicely. :)

Only thing is that I would probably prefer to fit the Kakimoto R exhaust as it is 80mm (same as the front pipe) whereas the Legalis is slightly smaller at 3".

Anyone here got a Kakimoto R exhaust (for M35 of course) in good condition and is in Vic by any chance?

I only want the Kakimoto R because the pipe diameter will match the front pipe. I much prefer the Legalis twin pipe muffler. :)

I have a white S2 RS4. I work at Mitchell so its mainly parked out of site, but I get out and about a fair bit. The guys at Trojan do the work on mine - very good guys and excellent work. I have had mine for over 2 years and still going strong. The exhaust mods are the best thing to do for stageas, and I am sure the M35 is no different. I still have the SMIC on mine, so I enjoy the weather getting colder!

next time you need tyres, come up the road to jaxquickfit and find me

D.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
×
×
  • Create New...