Jump to content
SAU Community

Centre Console

Gibbo_R35

By Gibbo_R35,
in R35 GTR

 Share

Recommended Posts

Gibbo_R35 Community Regular

Gibbo_R35

Posted
Posted

Guys, I have searched and have been unable to find information on pulling the dash centre console apart. I have a company that is looking at putting in some after market AV mods, however they want proper instructions on pulling the dash and centre console apart first. I have tried to download some manuals from links but I am gettig corrupt headers.

Does anyone have diagrams or instructions for this.

Cheers,

Jeff

Link to comment
https://www.sau.com.au/forums/topic/266352-centre-console/
Share on other sites
Godcla Community Regular

Godcla

Posted
Posted
Guys, I have searched and have been unable to find information on pulling the dash centre console apart. I have a company that is looking at putting in some after market AV mods, however they want proper instructions on pulling the dash and centre console apart first. I have tried to download some manuals from links but I am gettig corrupt headers.

Does anyone have diagrams or instructions for this.

Cheers,

Jeff

http://www.nagtroc.org/forums/index.php?sh...=27203&st=0

Link to comment
https://www.sau.com.au/forums/topic/266352-centre-console/#findComment-4546195
Share on other sites
Chris Rogers Grand Master

Chris Rogers

Posted
Posted

which part?

you start at the rear of the car and work foward. read teh links above as the side lower panels are not what they seem. the slide foward and NOT out. uper panels are on screws and the screen requires EVERYTHING in its path to come out.

to get the radio out (cd player) the ENTIRE centre console has to come out. I didn't bother trying with marks car. too much effort.

this is one car I did not like pulling apart. too involved. doing it once though will make the second one easier.

what does your freind have in mind?

Link to comment
https://www.sau.com.au/forums/topic/266352-centre-console/#findComment-4548031
Share on other sites
Gibbo_R35 Community Regular

Gibbo_R35

Posted
  • Author
Posted
Gibbo, will look at my links tonight and PM.

What are you doing out of interest?

He is looking at modifying the wiring loom and also the screen inputs (possibly replacing the touch screen) so we can have an integrated GPS but also to have the onboard CD player changed to DVD/CD. Basically looking at the twin disk Mod like the BMW's have to have the map DVD in one drive and use the other for GPS.

He is basically investigating what can be done....the above is the wish list.

Cheers,

Jeff

Link to comment
https://www.sau.com.au/forums/topic/266352-centre-console/#findComment-4549571
Share on other sites
Chris Rogers Grand Master

Chris Rogers

Posted
Posted
He is looking at modifying the wiring loom and also the screen inputs (possibly replacing the touch screen) so we can have an integrated GPS but also to have the onboard CD player changed to DVD/CD. Basically looking at the twin disk Mod like the BMW's have to have the map DVD in one drive and use the other for GPS.

He is basically investigating what can be done....the above is the wish list.

Cheers,

Jeff

would be interesting to see.

google some more info on QNX and the G37 infiniti. similar system. you basically have a linux computer in front of you. so off that if you can map the base system I'd be looking at a centrafuse setup theres a LOT of info out there on that and the system itself is quite impressive.

I'll stay clear of this sort of mod. from what I can see there is a databus system looped through it.

Link to comment
https://www.sau.com.au/forums/topic/266352-centre-console/#findComment-4549801
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      What accelerator cable can be used with greddy plenum

      By Duncan · Posted

      I was 99% sure the standard one is long enough to get there, you might just have to change the throttle orientation. If not, I remember someone having used an r31 cable instead, but that is probably harder to find than r33 by now...
    • V36
      What accelerator cable can be used with greddy plenum

      By V36 · Posted

      HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
×
×
  • Create New...