Jump to content
SAU Community

Recommended Posts

Hi guys,

Im looking for a R34 GTR V-Spec or V-spec II for about $50,000.00

Here are some iv found on carsales.com.au, I would really appreciate your opinion on best buy:

1.

5329673.jpg

http://www.carsales.com.au/all-cars/privat...43&__Nne=15

2.

4992933.jpg

http://www.carsales.com.au/all-cars/privat...43&__Nne=15

3.

4121769.jpg

http://www.carsales.com.au/all-cars/privat...43&__Nne=15

4.

4225876.jpg

http://www.carsales.com.au/all-cars/privat...43&__Nne=15

5.

4457185.jpg

http://www.carsales.com.au/all-cars/privat...43&__Nne=15

At the moment im leaning toward buying no 5, but in the description it says its M-spec according to wiki

"Another special model of the R34 GT-R is the M-spec. It was similar to the V-spec, but had special "Ripple control" dampers and a leather interior with heated front seats."

But this car does not have leather interior. Pls Help!

Link to comment
https://www.sau.com.au/forums/topic/266405-buying-a-r34-gtr-pls-help/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Seeing as you're located here in Perth, Danny Vahoumis has one for sale and it's a V-Spec.

Here's the link: http://japperformancecentre.com/home/index...s&Itemid=57

Sweet as, cheers for that.

why should u stay away from the black one?

id say because it has done 102500, hence the chances are the 100k service has not been done yet

as a ball park figure, 34 gtt would set u back around 1500 bucks for 100k service... i bet it is more for a gtr...

but black is the best look u could have... a bit biased cause mine is black :P

my 2c anyway

bly

For your info, some R34 GT-R model facts:

The R34 GT-R reappeared in 1999, with a revised chassis and other updates. The R34 turbos received a ball bearing core. The R34 N1 turbos had a metal exhaust wheel, and ball bearing center section. A 6-speed Getrag gearbox was used. The turbo outlet pipes were changed from cast to formed metal outlets. The intercooler had a temperature probe in the V-spec models.

Models:

GT-R - 2.6 L RB26DETT twin-turbo I6, 332 PS (244 kW, 392 Nm) (advertised as 280)

GT-R V-Spec - Additional aero parts, brake ventilation ducts, diffuser.

GT-R V-Spec II - As above + carbon fibre bonnet with NACA duct.

GT-R N1 - Blueprinted N1 motor, no A/C, no stereo, no rear wiper, basic interior trim. (only 45 made)

GT-R M-Spec - Leather interior, softer suspension with "Ripple Control" dampers, heated seats.

GT-R V-Spec II Nür - As above V-Spec II + N1 motor, 300 km/h speedo. (only 750 made)

GT-R M-Spec Nür - As above M-Spec + N1 motor, 300 km/h speedo. (only 250 made)

GT-R NISMO R-tune

GT-R NISMO Z-tune - 2.8 L (bored and stroked) RB26DETT Z2 twin-turbo I6, 500 PS (368 kW, 540 Nm) Z1 and Z2 (Only 19 made)

if u dont mind me askin why not the black one? too many kms?

Anything that has low km's and log books to prove them is a winnah in my opinion, especially when your forking out 50k on the car. But the Black one does have some tasteful mods. If you want some nice power then go the black one, if not, go with something that may prove more reliable due to lower km's

For your info, some R34 GT-R model facts:

The R34 GT-R reappeared in 1999, with a revised chassis and other updates. The R34 turbos received a ball bearing core. The R34 N1 turbos had a metal exhaust wheel, and ball bearing center section. A 6-speed Getrag gearbox was used. The turbo outlet pipes were changed from cast to formed metal outlets. The intercooler had a temperature probe in the V-spec models.

Models:

GT-R - 2.6 L RB26DETT twin-turbo I6, 332 PS (244 kW, 392 Nm) (advertised as 280)

GT-R V-Spec - Additional aero parts, brake ventilation ducts, diffuser.

GT-R V-Spec II - As above + carbon fibre bonnet with NACA duct.

GT-R N1 - Blueprinted N1 motor, no A/C, no stereo, no rear wiper, basic interior trim. (only 45 made)

GT-R M-Spec - Leather interior, softer suspension with "Ripple Control" dampers, heated seats.

GT-R V-Spec II Nür - As above V-Spec II + N1 motor, 300 km/h speedo. (only 750 made)

GT-R M-Spec Nür - As above M-Spec + N1 motor, 300 km/h speedo. (only 250 made)

GT-R NISMO R-tune

GT-R NISMO Z-tune - 2.8 L (bored and stroked) RB26DETT Z2 twin-turbo I6, 500 PS (368 kW, 540 Nm) Z1 and Z2 (Only 19 made)

So basicly if it has small vent on bonnet (NACA duct) its a V-spec II? and M-Spec has leather seats and is worse for drifting?

Cheers for the info dude

nah..the owner could have just bought the bonnet off a vspec2..really depends on what your priorities are when choosing a car (ie. plans to do it up or leaving it stock)

anyway i'm planning to sell my car soon but have not put it up for sale yet..pm if ur interested :)

buy Kelvin's lol spend a few more grand and get a whole lot more car

pm him for details if you're interested, seriously one of the hottest GTR's out there

EDIT: he beat me to it, pm him anyway lol

Edited by hoony

^ lol Shenton

R32 GTR is nowhere near as reliable as an R34 GTR generally speaking

if you want one as reliable as an R34 GTR you're paying the same price lol

i'm sure he wants reliability factored in... also, R34 GTR's are hot... if you want to sell yours Shenton let me know dude

can't wait until i sell my car

^ lol Shenton

R32 GTR is nowhere near as reliable as an R34 GTR generally speaking

if you want one as reliable as an R34 GTR you're paying the same price lol

i'm sure he wants reliability factored in... also, R34 GTR's are hot... if you want to sell yours Shenton let me know dude

can't wait until i sell my car

Yes, I'm selling mine atm but haven't really advertised it yet...still thinking sell, don't sell, sell, don't sell...but if price is right it would have to go..pm me if ur really interested :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...