Jump to content
SAU Community

Recommended Posts

Hello all.

When I went to start my car today it was sluggish to start. Like my battery was a little flat. But it did start and once it was running I could hear a belt squealing. I didn't really think anything of it even though this was the first time it had happened. My old wagon used to do it all the time.

But then I could smell burning belts. I turned off the aircon and it stopped. Then turned it back on and the revs dropped about 200revs and the squealing started again. I hopped out and had a look under the bonnet and everything looked as it should then sure enough when I turned the aircon back on the belt was slipping. It was barely turning.

Even when I was driving at 100kmh I tried it and I could hear squealing and my revs dropped abit.

Obviously theres something wrong with the compressor but Im just wondering if anyone might know what exactly. It the pump seized or does the clutch on the pump need adjusting or something? Other than this the aircon worked fine although I did notice it wouldnt get anywhere near as cold as my brothers R34 Gt-t and on hot days it really struggled.

Are compressor motors easy to come by and roughly how much? They look like theyd be a pain to replace. Is this so?

Sorry about the long winded post.

Any help would be great.

Edited by burkey22
Link to comment
https://www.sau.com.au/forums/topic/266473-air-con-dramas/
Share on other sites

First of all it's not ur condenser... it's a compressor, condenser is the radiator looking thing at the front of the car...

I say ur compressor is seized, you can not change it... it's against the law... u need a refrigerant handling license to work on an A/C...

U'll need a mechanic to do it for u...

Link to comment
https://www.sau.com.au/forums/topic/266473-air-con-dramas/#findComment-4547741
Share on other sites

Yep. I got the squeeling from my air con belt. For a long time thought it was the alt belt. Mechanic is coming neat week for service. Will let you know.

On the other squeaking banshee, hope to get the dreaded front end squeak fixed too.

Link to comment
https://www.sau.com.au/forums/topic/266473-air-con-dramas/#findComment-4547905
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...