Jump to content
SAU Community

Recommended Posts

i have a full td06 20g turbo kit for sale

comes with manifold turbo wastegate

all heat wrapped

i can also throw in a twin 2.5 inch zorst $700 completely legal and plumb back with twin cats!

this is all bolt on for a rb2530 in a r31 however will fit a rb20 or a rb25 in a r31 with very minor modifications

8.jpg

15.jpg

16.jpg

4enginebay.jpg

turbo is good for 250rwkw at 12psi

full bost on a rb2530 at 2k

in can and drivable if you need a test to swwe what it sounds like and goes like

Link to comment
https://www.sau.com.au/forums/topic/266493-td06-20g-turbo-kit/
Share on other sites

Is this Mark's old setup?

If so it is identical to my turbo setup as the turbo was originally meant for a drag GTR twin TD06-20G setup that was split up, i got one of the turbos, Mark the other. So will work real well on an RB20, 260rwkws at 18psi and makes that boost at about 4,200rpm but really sits you in your seat from 4,500rpm.

2k is a steal!

so does it come with oil lines and dump pipe? sorry for the sill question but only turbo manifold and gate were listed.

what brand is the gate?

haw long have you had it running on your car? kms?

thanks damo

yea marks old setup

it comes with the oil lines

has been on the car for about 2000 km and on marks car( same engine... i bought the whole engine) for another 1k

gate is the stock trust one

for an extra 700 comes with a custom twin 2.5 inch exhuast with twin cats and muffle ( fits a r31 obvioulsy)

or 200 exta a nd ill cop of the dump to under car and a decent length from the wastegate to get you cracking on your car

pete

0448468884

This is just what i was looking for until a couple of weeks ago until the engine let go in my daily :banana:

I'll see if you're still selling it in a few weeks time when i can get the cash together.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...