Jump to content
SAU Community

Recommended Posts

Hi, I know I'm new on this forum and this is my very first post here, but I can't seem to sell my turbo on the other forums, like zilvia or nico, so i decided to try here. Well I had a rb20det, decided to swap it out. Now I'm left with a brand new hks turbo that I have no use for. I bought the turbo for over 2000 usd, I'm asking for 1500 shipped.

HKS GT2835 Pro S - 420 PS Output

COMPRESSOR:

-Wheel- 56 Trim - 53.1 Inducer / 71.1 Major

-Housing- 100 Inlet / 50 Outlet - 0.50 A/R

TURBINE:

-Wheel- 84 Trim - 56.5 Major / 51.8 Exducer

-Housing- T3 inlet / Outlet spec:

Internal GT-Pro; 0.68, 0.87 A/R

1239685204.jpg

1239685225.jpg

1239685249.jpg

1239685270.jpg

1239685183.jpg

And here is the website,

http://www.hksusa.com/products/?id=1670

1500 shipped Usd, I will only accept paypal.

Email me at [email protected] for a faster response.

I'm located in Philadelphia Pa, USA.

Edited by foamcup

I understand that this is my only first post here, if you need any info on me, picture of my id, me holding the turbo with my id, i will do that so. Please email me and I'll give you my contact number if you want to even talk to me.

All emails replied. Thanks!

Yes pay pal only haha, I'm verified and have a premier account.

Bump, you don't get a brand new hks turbo for this price often. I'm really taking a big lost here. I have some interest but no one is pulling through, anyways first come first serve, i won't hold the turbo. I need it gone.

paypal this item and you might have some luck.

Yes 1500 US dollars shipped to you.

I waited months for this turbo from japan to get to my house, by the time it did I lost interest in my rb20det and 240sx. Anyways, I have original receipt for the turbo as well that I will include.

i cant believe this isnt gone yet - ill refer this to my mate with an s15, hes broke but maybe he'll pull some cash from somewhere, he usually does - he has an s15 after all

Since your new here and no one knows you, it would be easy to scam someone over 1,500 since your in the us. It be hard for you to sell since it's a risk someone has to take. It looks shiny and good but it could be blown and you had it

Polished. Just what I think, sorry if I sound skeptical but it happen to me before.

Yeah, its even harder to sell in the states, everyone is broke and we don't get skylines here, and for the skylines that does make it over, you rarely to never see them unless you're at a show or a event. Well, what else can I do to make one feel at ease, to buy from me? If you search my name, you'll see I have sold many things on zilvia.net, 240sx.org. Anything else that a buyer would like me to provide please email me and let me know, I'm more than willing to work with you.

Anyways, I just purchase a new toy. Enjoy

73 te21 52,000 miles, all original.

1240977121.jpg

1240977278.jpg

I also have a f20c ae86 = )

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...