Jump to content
SAU Community

Recommended Posts

Hey all,

Just want to compare what results other people acheived from BMT Dyno.

Please also state the mods you have.

Anyway I go first.. Just had my car dynoed at BMT , im sure Sam will remember me ;)

Car:

------

-Skyline R33 GTST Type-M

Mods:

-------

-2 Stage Boost Controller (set to 11 psi, no spikes)

-3" Dump/Front pipe

-3" Cat

-3" Exhaust

-Apexi SAFC tuned from Sam himself

-NGK Plenium Spark Plugs gapped to 0.8mm

Result:

---------

-127rwkw

Is that abit too low? I know that the BMT dyno is more accurate than all the other Dynos out there and that other dynos run higher. Just wanna see what other people had acheived from BMT :P

Link to comment
https://www.sau.com.au/forums/topic/26690-bmt-dyno-results/
Share on other sites

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

ive heard it is more conservative.. i read somewhere a car was put on the bmt dyno and it got well i forget :P but then the same car was put on the dyno at auto salon and it was much higher. Does the word conservative mean more accurate?

i was rather shocked at 127rwkw i must say. the car should me more then that stock

Link to comment
https://www.sau.com.au/forums/topic/26690-bmt-dyno-results/#findComment-563745
Share on other sites

It is always hard to say more accuracy but I think all dynos are conservative compared to Autosalon. I dont know about BMT's as I use Ben at RacePace and Simon's at Nizpro that are different but come up with very similar figures that are usually consevative by other dyno's standard.

Mick.

Link to comment
https://www.sau.com.au/forums/topic/26690-bmt-dyno-results/#findComment-563794
Share on other sites

yes dude, everything seems ok. turbo spinning, only got stock intercooler though :P i was shocked myself also.. its really weird, timed myself 0-100km using the apexi RSM and scored 5.8sec? my car isn't that sloww as i can feel the pull in it but why 127rwkw that puzzles me.

Link to comment
https://www.sau.com.au/forums/topic/26690-bmt-dyno-results/#findComment-563807
Share on other sites

Hey Eric 127rwkw is a bit low considering ur car is an auto with auto u loose 10-15rwkw easy I got 140rwkw when mine was auto with 11psi boost 3" cat back zorst and tuned safc on BGT's dyno about 2yrs ago it could be the dyno itself. ur 0-100 time is pretty respectable so u might actually have more than what the dyno shows that would be my theory anyway.

Link to comment
https://www.sau.com.au/forums/topic/26690-bmt-dyno-results/#findComment-563971
Share on other sites

guys just to let u know most older dynos are not very accurate and generally put out a lot higher readings... all the new dynos that are around are genuine readings which u should really go by... it may only be low 120s but i bet it will beat or stay up with cars that have dynoed 180rwkw on other dynos.

Link to comment
https://www.sau.com.au/forums/topic/26690-bmt-dyno-results/#findComment-564030
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...