Jump to content
SAU Community

Recommended Posts

hey haha i ran a 13.3 at 112mph need to improve big time.

me and a few mates are heading down tonight.

taking a 33 with 250rwhp to see what it can do before we change all the turbo this weekend and taking a mates 33 with 360rwhp using a gt-rs before we change the cams in it. Just wanna see what they do before and after kinda thing.

13@130mph ?? I did a 13@107mph

unless you meant 11 sex

No, I meant 13..

Maybe it's cos he is gonna start in 2nd and just do a bit burnout-takeoff :D

Close.. I'll start in 1st but it will probably be top of 4th before it stops spinning :blush:

drags are $40 for competitor, i think 10 or 15 for spectator, its at quit motorplex quinana, google it :) every wednesday, dont need to be a member, just need a helmet, long cloths and enclosed shoes, oh and a license and roadworthy car haha

VishR33, Woop Ass Wednesdays is a weekly event held at the Perth Motorplex in Kwinana

You can find the details here http://www.motorplex.com.au/

Season ends soon!!

I'm going to head done before the season ends for a few runs, was too tired to go tonight.

I'm taking my car down next week to see how of goes. The previous owner ran a 14.1 with wheel spin, so I'm looking for a 13.9 with the semi slicks. I've got the car for it, just lacking the driving skills :O got a few mates coming down as well. They always need more Sylines there!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
×
×
  • Create New...