Jump to content
SAU Community

Recommended Posts

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Well for those that want to listen ................ both, or all 3 cars shown for that matter, I haven't said they DON'T FIT, I said .............

"And might look better if the tires actually fitted the rims?????????"

The legal issues with tires is simply this.

To all those that choose to have them set up this way.

IF your involved in a FATAL accident and your tire fitment is not 100% legal and as per the ADR rules of the car .................. YOUR GOING TO GAOL! or at the very least, your going to be prosecuted for causing the accident.

Think about that! Ponder your life after you have hit a pedestrian or another car and caused the loss of a life, because I can tell you first hand what it's like to hit and kill a pedestrian and with today's legal fees, I can tell you you will need many tens of thousands of dollars to defend yourself.

The police confiscated my car and had it for over a week trying to find something, ANYTHING that was not stock standard that they could use against me in court and the best they could do was quote braking efficiency %'s and that I had wide wheels.

All my cars will be as the tire fitment is designed.

Mitchy,

Why didn't you consider 235/40 instead of 45 profile?

The 40 profile would have sat better on your 9 inch rims and also been a lot closer to the preferred dynamic radius and been another 13mm lower which may have cured the rubbing on the guard issue.

Have a nice day!

D

I agree with Dennis. while the first poster's tyres don't look too bad IMHO (and if they're listed as suitable for a 9" rim, then there's legally nothing wrong with them) anything more is just plain dumb and illegal. Of course for optimum performance, 235 on a 9" rim wouldn't be ideal - better to stick to a 8" rim. But then again, I get the feeling the car wasn't built for ultimate track performance.

Now, as for fitting 215 tyres on a 9" rim - well that's just a plain wank, nothing less. Just because a bunch of idiots in Japan do it does not make it cool. The concept of severely restricting a car's performance potential just to look "tuff" is akin to removing springs and riding on bump stops, or big bodykits that do nothing more than add weight. Sorry - it's pure rice.

If you accept it for what it is, then that's fine. If you sit theere and try convince others (and yourself) that "they fit with absolutely no problems whatsoever", then you need your head read.

love your passage man... wish my coupe was as awsome and runnin lol hence streached tyers to fit

my 9.5 x 17 - 19's 235\45's

011.jpg

010.jpg

o and looken for updates on 31 site :D

Edited by red_screamer

You are so lucky your thousands of km away.

We are pretty laid back here, but f**k this thread has stirred up a shitstorm

I think we all have to agree that car modification is in our own tastes and personal likes, and if some of us prefer safety to good looks then so be it, If some know that safety is more important, it only shows who has either more life experience or just a few more brain cells than the average p plater...

love your passage man... wish my coupe was as awsome and runnin lol hence streached tyers to fit

my 9.5 x 17 - 19's 235\45's

011.jpg

010.jpg

o and looken for updates on 31 site :D

Like those wheels

Are they Superlites?

What offset are they

Edited by R34
Like those wheels

Are they Superlites?

What offset are they

17x9.5 -19 i can gather from his post...

mine are 17x9 +15, and his seem to sit about 40mm further out like the negative offset would suggest.

if they are legal, then there must be some sort of ADR testing done etc to prove if they are safe or not

If they are, then great! Make sure you print off the ADR page with that stated andd keep in your glovebox for the day you might get pulled over

I think i will spectate now, you can request admin to clean this thread up too...

im curious how much boost wwas the kkr 480 pumping to get 300+ at wheels, hefty number

about 17psi, to be honest i think that figure is a bit 'high', but when i get it retuned its going for 20 pound

Dynopic.jpg

all i can say is good on you mitchy for doing it how you like it :D your 31 looks tuff as nails hows the traction with the 235s?

cheers. :P

just depends how you use the throttle, they are perfect for normal driving, but give it a chance and it will paint lines in the first 3 gears. :)

All the tyre/wheel issues aside - it looks to be a pretty neat package, but I have to ask in regard to the first dyno graph, what's with the AFR's?

It dips well into the 10's for a while there. To me that seems to be dumping fuel in for intercooling effect (preventing the pistons from getting 'religious'), where less timing (or preferably less boost) would be better for everything involved (including power & torque).

Can you provide any more info on that run, or is that tune now history with something 'happier' taking it's place?

Edited by BensDR30

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...