Jump to content
SAU Community

does APEXi make Power FC for RB25DE?

mmmskyline

By mmmskyline,
in Engines & Forced Induction

 Share

Recommended Posts

mmmskyline Apprentice

mmmskyline

Posted
Posted

hi all, i'm contemplating on a turbo conversion on my r32 gts25, to date the engine mods on it are, tomei cams, 6:2:1 aftermarket extractors, 2 1/4 inch exhaust all the way no CAT, i'm thinking if i turbo the car i would like to use Power FC, but i'm told that Power FC only made ECU for specific engines, eg. RB25DE or RB25DET

I will probably be using a r34 gtt turbo, and manifold or maybe custom made manifold, how much boost can these turbos handle? I'm wanting around 1 bar, would i need to get the turbo modifed for steel compressor wheel for this boost level? if so this would in turn tend to lag a bit, this brings me to my next point of compression ratio and forged pistons....

I also have a few questions about the compression of RB25DE, they are 10:1 from factory, I'm thinking of keeping it the same compression is this ok? if i were to use good aftermarket forged pistons which are made to suit 10:1 would that make it much better for the engine, I also noticed that the factory compression ratio of a RB25DET is 9:1, is there 'that' much of a great difference in this? 10:1 and 9:1 is only 1 off.

any advice would be great, thnx in advance

Link to comment
https://www.sau.com.au/forums/topic/26807-does-apexi-make-power-fc-for-rb25de/
Share on other sites
skyla Community Regular

skyla

Posted
Posted
Originally posted by mmmskyline

I also have a few questions about the compression of RB25DE, they are 10:1 from factory, I'm thinking of keeping it the same compression is this ok? if i were to use good aftermarket forged pistons which are made to suit 10:1 would that make it much better for the engine, I also noticed that the factory compression ratio of a RB25DET is 9:1, is there 'that' much of a great difference in this? 10:1 and 9:1 is only 1 off.

you can keep the compression ratio 10:1, but you can only run relativly low levels of boost, I might be wrong, but I think it was about 8psi tops, any more boost and you start running into problems.

Nismodified Proficient

Nismodified

Posted
Posted

i think the stock CR for a turbo is 9.5:1, stock is 10:1, as said by skyla.

and yes, it is a fairly big difference, responsiveness is affected. Think of a turbo car in its lag range, thats what it would be like.

SOrry to go off topic, but can you give us any information about your tomei cams likes cost, dyno sheets, the impressive it made on you etc..

geordie Proficient

geordie

Posted
Posted

yeah im keen to hear what sort of power gains you have made out of those cams. You got same car as me lol, yours 4dr or coupe, mines coupe, i plan on doing a few n/a mods, get the power up a bit. So yeah same q's as nismodified, cost, power etc. Cheers

mmmskyline Apprentice

mmmskyline

Posted
  • Author
Posted

most of the performance mods were done by the previous owner of the car, who used to be in SDU also, so i think u'll have to ask him, he's kennydead on SDU forums

i think he told me he scored those tomei cams for free, coz he has a mate in japan who works around tracks or sumthing, and when the japanese go race or drift the cars, and sumthing even remotely 'out of tune' they'll throw sum of the near new parts away, these tomeis had only been used for a few laps so i'm told, and they threw it out, so his mate asked him if he wanted it, suits the RB25DE lol,

dyno, i think it made 110rwkw last time dynoed, not sure if that was with all the mods currently on it, but yeah, very smooth driving at the moment.

he's also currently doing a project car, r32 gts25 also , turbo'd it with garret t04E ( i think), steel compressor wheel, running standard 10:1 CR, very responsive, very quick, he says with a good tuner the CR can be kepts high

mmmskyline Apprentice

mmmskyline

Posted
  • Author
Posted
Originally posted by geordie

yeah im keen to hear what sort of power gains you have made out of those cams. You got same car as me lol, yours 4dr or coupe, mines coupe, i plan on doing a few n/a mods, get the power up a bit. So yeah same q's as nismodified, cost, power etc. Cheers

me coupe as well, got full GTR body kit with the GTR wing as well, gunmetal color :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTR ZOAH
      S A U N S W Club Membership

      By GTR ZOAH · Posted

      Welcome 😉
    • Kinkstaah
      R34 Gt Auto Tuning

      By Kinkstaah · Posted

      If you want to do the wiring, the GTT engine ecu has the same pinouts extra that the seperate TCM in the NA car has. You can literally grab the wires/pins that lead into the Seperate TCM and wire them into the corresponding pins in the GTT Engine ECU. You could then in theory Nistune it. I realised this when everyone put it in the too hard basket and I actually looked at the f**kin R34 manual. This is after I had previously had a seperate aftermarket TCM controller in my original N/A chassis car and a very built gearbox from a GTT, running a seperate Haltech engine ECU. I ran into this issue when I re-shelled the car into a GTT shell, so my aftermarket TCM was no longer plug and play, because the loom/modules were not present. I was pretty livid when realizing just how simple the original fix actually was. It sat for 3+ years at various workshops trying to find a solution. In practice none of this is a worthwhile idea for a lot of reasons, generally surrounding the shitness of the NA auto, the autos in general that come with skylines, and the NA engine and lack of gains. The gearbox is specced for the 2.5L N/A and barely at that level. If you have to pay anyone any money to do any of this, that is money spent on manualizing the car and it's not even close in terms of a comparison. Learning to drive manual is simpler than going through the pain of dealing with the N/A gearbox and he'll have fun to boot.
    • GTSBoy
      ugently need expert / experienced opinion

      By GTSBoy · Posted

      Semi-correction to my blanket statement that you can't bend rubber hoses. It seems that you can get most of a result, by doing as this guy does. I wouldn't promise that the bends will stay in the hose forever. I think if I found they wouldn't stay, I'd get a larger hose and cut some 90°s out to go over the bends I wanted to be in the smaller hose, as a reinforcement.
    • V35_Paul
      Looking at getting a Tesla style Screen for my V37 Skyline.

      By V35_Paul · Posted

      Just a heads up. Mine has just failed. When i turn the car on it just reboots everytime then the word "Android" shows up then goes to a black screen. I've aksed the company i got it from for some help but it's passed their 90 day return so they wont help. I have to swap back to my old system this weekend 😭
    • Murray_Calavera
      R34 Gt Auto Tuning

      By Murray_Calavera · Posted

      Does the car have to stay auto? If so, you might be looking at a ZF swap in future. 
×
×
  • Create New...