Jump to content
SAU Community

Recommended Posts

Hey,

Just letting you guys know we are opening up a new performance workshop. We will be specialising in performance modifications and fabrications, engine rebuilds, supply and fitting of body kits and general mechanical work.

We will be located at Stanbel Road Salisbury Plain.

For those of you that work long hours we are willing to work after hours to fit into your schedule. In order to get your cars back on the road and back to you as soon as possible to mimise any inconvenience.

We will be there setting up workshop as of Tuesday morning ready for business trade as Monday 11th May, 2009. We are looking at having a meet and greet/opening bbq soon. Dates to be confirmed.

For more details please contact Simon on 0413 595 838 or Ben on 0403 493 311. Landline to be notified shortly.

We look forward to dealing with you soon.

Cheers,

Ben and Simon

Link to comment
https://www.sau.com.au/forums/topic/268127-pitlane-performance/
Share on other sites

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

well that sounds super

before we go any further i highly suggest you read the >>SAU guidelines<< and contact the Trader Admin to find out what you need to do to keep your signature advertising your business

i wish you all the best in your endeavors in a very competitive trade but with the premise of opening at weird hours to suit your customer that will appeal to quiet a few i imagine

that's not Ben from Smooth Garage or Simon Michealmore ??

thats wicked...good to hear a garage being open at all sorts of wierd hours to cater for people that work the normal 9-5 hours...goodluck to all involved and hopefully see you guys soon....considering your up north

  typevu said:
Any opening discounts? Say... a certain high percentage off the receipt? :P

Yeah we will be giving discount to random people at our meet and greet day.

  Krishy said:
thats wicked...good to hear a garage being open at all sorts of wierd hours to cater for people that work the normal 9-5 hours...goodluck to all involved and hopefully see you guys soon....considering your up north

Yeah Ben and i know how hard it is to get stuff done to your cars when your working long hours. We are also thinking about getting a car trailer so if your cruising around and brake down you can call us and we can come out and bring your car back to our workshop repair it and get it back on the road asap.

  Madaz said:
now that car trailer idea is a winner works on so many levels and im sure not just import drivers would use a service like that

yes been in the positon of having an unroadworthy car and just getting it to place's for tunes is hard so its also good for those of you with track only cars, and need work done, we can collect and drop the car off to you. Also we are working on all types of cars and not just imports :P

  Madaz said:
then it should be like $70 round trip i know flat top's to charge about that much

and remember its an inconvenience service

But they aren't a towing company, if they charge you a small fee for towing as long as its going to their workshop, then the cash is made in parts and labour, not dollars per k's.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 馃
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
  • Create New...