Jump to content
SAU Community

Recommended Posts

Go the S13 Silvia.So many people go spending a fortune on AE86 Sprinters trying to be initial D...Not a good budget drifter in my opinion. Why bother when an S13 comes with the SR20 and beefier Gearbox and diff standard.Whilst the Sprinter guys have gotta spend and change pretty much everything...S13 All the way

180SX and R32 are the easiest to find a decent one but will probably take all ur budget. Could get a NA silvia but not as easy to find good manuals and wouldn't be as fun as you'd have to work harder to slide it (unless you find constantly holding WOT and kicking ur clutch like it's ur pregnant missus fun, then you will love it).

Either way, whatever you get, make sure it has coilovers and a mechanical diff as the basics. A good race seat and deep dish steering wheel (or bosskit spacer) will let you get a good driving position/hold you in place while sliding. That is almost as important as mechanical mods.

S13

Cefiro

R32

R31

My mate started with an R32, but that had a built RB25 in it. He came 2nd in the WA Drift Final Battle yesterday, not bad for his first season. The car started off as a daily, turned into a full blown drift car.

My other mate is buying a Ceffy for $1500 as a rolling unregisterable shell, and putting an RB25 engine/gear box in it. Will come in way below $10k

I'm buying an R31 for a bit of fun. Weld the diff, strip the interior and add some coilovers. Will be a lot of fun, and I'll add extras as I go along.

Plenty of options for you, just think it all through properly and you should make the right decision!

hey bd_89 have u had any luck looking through the for sale section??

came across this bad boy yesterday,

http://www.skylinesaustralia.com/forums/27...ri-t266391.html

could be what your after though maybe a bit over the top i dont know, it looks like the brakes, suspension and engine are all taken care of for ya.

anyway some very helpful suggestions in here, i just thought this sounded like what you might be interested in and around your price range :D

good luck with it mate.

hey bd_89 have u had any luck looking through the for sale section??

came across this bad boy yesterday,

http://www.skylinesaustralia.com/forums/27...ri-t266391.html

could be what your after though maybe a bit over the top i dont know, it looks like the brakes, suspension and engine are all taken care of for ya.

anyway some very helpful suggestions in here, i just thought this sounded like what you might be interested in and around your price range :)

good luck with it mate.

Hey,

Yeah ive had a look on a few forums and carsales. Seen a couple of things that are interesting just not in a position to buy for a few months (licence is on vacation). Was just interested in what people would recomend so i could figure out how much i need to save also was thinkin maybe s15 and use as a daily/drifter but the 20g+ price and the thought of bending it dont go to well.

buy my r32, i wasnt planning to sell it but just bought a house and need to focus on that at the moment.

19022009335.jpg

i have been setting it up for drift, but havent actually drifted it.. and with oran park closing down, im turning my attention away fom drift and more to superlap, so a gtr build up is in the planning.

cusco coilovers, hicas bar, cradle bushes, all coolant lines, radiator and thermostat, waterpump replaced, head pulled off and checked, replaced head gasket, safc 2, 300zx afm, kakimoto turbo back exhaust, hdi fmic, 122000kms, 100000km service done, bought as a complete stocker in october 08, sept 09 rego.

its in your price range :D

pm me if your interested at all.. im happy to hang on to it for a while, when it sells it sells. it wont be getting driven much.

cheers

Linton

buy my r32, i wasnt planning to sell it but just bought a house and need to focus on that at the moment.

19022009335.jpg

i have been setting it up for drift, but havent actually drifted it.. and with oran park closing down, im turning my attention away fom drift and more to superlap, so a gtr build up is in the planning.

cusco coilovers, hicas bar, cradle bushes, all coolant lines, radiator and thermostat, waterpump replaced, head pulled off and checked, replaced head gasket, safc 2, 300zx afm, kakimoto turbo back exhaust, hdi fmic, 122000kms, 100000km service done, bought as a complete stocker in october 08, sept 09 rego.

its in your price range :D

pm me if your interested at all.. im happy to hang on to it for a while, when it sells it sells. it wont be getting driven much.

cheers

Linton

Lol, still gotta sell my car buy a GTR and then wait a few more months till i have enough for a drift project, thanks anyways though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...