Jump to content
SAU Community

Recommended Posts

As topic suggests, but also I want to remove just about everything else i don't need. ie; spare tire, jack..etc etc.

What do I need to do to make this all legal? And what more, registerable?

It will be cleanly done too. eg. when rear seats are out I will put carpet in to make it look cleaner.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/268287-want-to-remove-rear-seats-for-good/
Share on other sites

As topic suggests, but also I want to remove just about everything else i don't need. ie; spare tire, jack..etc etc.

What do I need to do to make this all legal? And what more, registerable?

It will be cleanly done too. eg. when rear seats are out I will put carpet in to make it look cleaner.

Cheers.

I thought you where removing everything you don't need :huh:

Like Chris said, you will need to get it engineered and registered as a two seater. While your at it you should get a pair of fixed back bucket seats combined with harnesses :D

Out of curiosity, why do you want to remove them?

Matt, carpet only weighs 250-500g if even.

I've seen you drive past me once on Mona Vale rd near Terry Hills, I got a black on black R33 series 1.

Anyways, spoke to a reputable mechanic, he said I gotta take the rear seat belts out too. Apparently having no spare tire is a defect. Wtf???

Basically wanna make the thing as light as possible, they are heavy as f**K...anything to shed some weight.

It's a weekend car, and in near future wanna head out and do some track work.

Honestly,

if its just a weekend car, I dont see the point in taking everything out.

My old R33 was a weekend car then I basically brought it out for track use.

When at the track, I took everything out from the boot there, spare, tools, jack everything.

I had taken the back seats out so I didnt ruin them by having my semi's and track rims on them. When I sold the car, they went back in and were clean as and looked like no one had sat in there.

Unless your going to do something like Merli (see his GTR build thread in motorsport) thats where you want to remove everything, old wiring thats not needed, sound deadning, seats, seat belts etc etc otherwise you arent going to see good results from taking what you can for a road/weekend car.

The prev owner of my new car did this...

MX5002.jpg

This was to fit the cage

MX5007.jpg

Well, thats my thoughts and thats why I didnt do it!

Are you thinking of fitting a cage?

Another way to look at saving weight...

Remove aircon and heating

remove power steering

taking out drivers seat and putting in a lighter bucket seat

thats my 2.2 cents :(

don't qoute me, you'll have to read up on the rta website - but if you leave the rear seat belts in, but take the seat out, it's still legal. The seat itself is only a comfort provision, as long as there is a space for someone to sit, and be restrained via seatbelt, all is good. So you can still take the seat out, just leave the belts in.

in reality, its not worth it mate.. the seat weighs stuff all, its foam and material, around a small steel frame... usually around 10kg. 10L of fuel also weighs 10kg.. just dont fill it all the way and you'll get the same effect.. better actually as the tank is behind the rear axle.

you can remove all of the sound deadener and put your carpet and seat back in, the sound deadener is pretty heavy, i removed nearly 9kg just in the rear seat section alone.. that plus the seat would be 20kg i know, id rather the seat than sound deadener.. i havent got to under the front seats yet.

when i had the seat out, the noise was getting to be unbearable, not exhaust noise, but road noise, tyre noise, couldnt hear the stereo and couldnt hold a conversation at a comfortable level.. the seat went back in and didnt notice a lick of difference in handling or performance.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My apologies. I forgot we were talking about weird beard M series stuff. Had been talking elsewhere with someone about an R33 with similar subject and got confused.
    • Nope, I don't like the look of ND RF, or any ND really, I don't like their faces or arses, why, because of their "modern" lines, the NC, whilst "modernish" has a more rounded shape that I like Well, that's how my overly judgemental eyes see it anyway  
    • Should be more than fine, especially the overall fuel pressure would never exceed 3.5bar (assuming that thing never gets more than 0.5bar of boost in stock form). According to the chart, it's 11amps.
    • I definitely know the first rule here, look first, ask second. I've seen many people get roasted 😂 I found a few diagrams for the RB, but I'm yet to come across one for the VQ. From what I have read, the pump gets the +12v along with the FPCM, and it's the negative wire that gets passed through the resistor to regulate the voltage. So I assume I can just ground the negative wire at the pump to eliminate the FPCM control. But I really wanted to see the VQ circuit diagram first to make sure I understood it correctly. Once the new pump is in I'll do some testing to see how it behaves, and in the meantime, I'll keep looking for a wiring diagram. Thanks for your help mate, your time is greatly appreciated.    
    • Maybe? I have the Supercheap ToolPro low thingo. It has a somewhat smaller diameter lifting "bowl" than you would expect on a workshop grade trolley jack, and a split rubber pad to suit that diameter. It clears the "N1" style skirts I have. Probably wouldn't if the jack's bowl and a suitably larger rubber block were in use. Having said that though.....you only need the rubber block to exist on the inner side of the pinchweld, so could carve away any rubber that fouled the skirt, leaving some there for "insurance" </simples>
×
×
  • Create New...