Jump to content
SAU Community

Recommended Posts

If you mean automatic gearbox do a search on "shift kit" for a snappier change. If you want to rebuild it to take 300kw then that has been discussed a little while ago too. If you really do mean drive train then you can start by replacing the S1 stuff with RS260 or GTR parts.

i've got a Full auto rebuilt to stage 2. can handle 500hp.

just ran it in. took it back, need a bit more pressure put in it, hope its all good. was ment to pick it up today but they lost power and cant do anything.

should be tomorrow. but as for the wearing in bit. its pretty tough :P

feels just like the normal box when cruising, you may notice it holds gear for the bit longer before changing. and its not rough on the change though.

mech said once its all fixed up, wheels should be chirping when you give it to it :D

thanks for that.

i have read a fair bit on the other threads about mt automatics and cooler upgrades. seems to me that this site really doesnt mind helping out fellow members.

good to see

im also looking for the clear tail lights as mine are dull and look crappy.

steve

thanks for that.

i have read a fair bit on the other threads about mt automatics and cooler upgrades. seems to me that this site really doesnt mind helping out fellow members.

good to see

im also looking for the clear tail lights as mine are dull and look crappy.

steve

Series 2 lights your after. they pop up in the sale section from time to time.

there is also a WANTED TO BUY (WTB) section

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...