Jump to content
SAU Community

Nm35 Hicas And Coilovers

Nick Bailey
 Share

Recommended Posts

Nick Bailey Apprentice

Nick Bailey

Posted
Posted

I was just about to buy a set of Tanabe Sustec Pro NF Coilovers. The supplier came back to me asking if I have Hicas or not, apparently if you have Hicas the coilovers can rub on some of the machs.

I am still to establish wether or not I have Hicas or not, however I am under the impression that if the car has Hicas there is a dash light which will come on when you turn the ignition. There is no Hicas light on my dash, so unless the bulb has blown I am assuming I don't have it.

I have had both gtst's and gtr's with Hicas, and there is always a dash light on ignition.

Any-one had any experience with any of the above

Link to comment
https://www.sau.com.au/forums/topic/270935-nm35-hicas-and-coilovers/
Share on other sites
bikenut Apprentice

bikenut

Posted
Posted

Hi Nick

If your car has HICAS you will have a light that comes on with ign.

You can see the HICAS control on the back of your rear sub frame. When looking under from the back it looks kind of like a wiper motor blocking the view of the diff. Mabye you could google and get a picture.

Muz

Bis-e Bee Mentor

Bis-e Bee

Posted
Posted

Completely off topic, unless you have something rare you mispelt Stagea in your profile :ninja:

Only a few of the models had HICAS, it's not a common features except for the

If you want to make double sure you could probably get someone to FAST the VIN Number and confirm if HICAS was factory fitted.

(extracted from Wikipedia)

  • 250tRS FOUR V HICAS: A 250tRS FOUR V with the addition of the Nissan HICAS four wheel steering system
  • AR-X FOUR: A 250t FOUR (ie 2,5L turbo/4wd) model with increased ride height and SUV-like body ornaments. 206 kW (276 hp)
  • The were 4 'aero selection' models added in 2002 to the 250RS/250tRS FOUR/250tRS FOUR V/250tRS FOUR V HICAS ranges, this added a bodykit to the standard car

Nick Bailey Apprentice

Nick Bailey

Posted
  • Author
Posted
Hi Nick

If your car has HICAS you will have a light that comes on with ign.

You can see the HICAS control on the back of your rear sub frame. When looking under from the back it looks kind of like a wiper motor blocking the view of the diff. Mabye you could google and get a picture.

Muz

Thanks, there is no light and nothing blocking the diff. Suspension and hubs all look ok. Don't think I have Hicas.

Its like a disease

Nick Bailey Apprentice

Nick Bailey

Posted
  • Author
Posted
Completely off topic, unless you have something rare you mispelt Stagea in your profile :D

Only a few of the models had HICAS, it's not a common features except for the

If you want to make double sure you could probably get someone to FAST the VIN Number and confirm if HICAS was factory fitted.

(extracted from Wikipedia)

  • 250tRS FOUR V HICAS: A 250tRS FOUR V with the addition of the Nissan HICAS four wheel steering system
  • AR-X FOUR: A 250t FOUR (ie 2,5L turbo/4wd) model with increased ride height and SUV-like body ornaments. 206 kW (276 hp)
  • The were 4 'aero selection' models added in 2002 to the 250RS/250tRS FOUR/250tRS FOUR V/250tRS FOUR V HICAS ranges, this added a bodykit to the standard car

Seems as though the 250t with Hicas also had a bodykit, I have no body kit therefore I have no Hicas

Nick Bailey Apprentice

Nick Bailey

Posted
  • Author
Posted
yeah just take a photo and we can tell you

also, i have the body kit and i DONT have hicas. then again i have an RX and hicas wasnt an option. it was on RS. ARX all have them, and AXIS im not sure

OK, I will look for the pump thing and take a photo. Thanks

Paramour Proficient

Paramour

Posted
Posted

no no i know wat it looks like...

well near the diff area a massive plug looking thing...

Can someone with HICAS please post up a pic so us less HICAS-ologists have a better understanding of what to look for or be prepared not to see under our stags. . .

andy65b Veteran

andy65b

Posted
Posted
Can someone with HICAS please post up a pic so us less HICAS-ologists have a better understanding of what to look for or be prepared not to see under our stags. . .

Maybe this will help........

Sorry the quality is pretty crap but it will give you the idea.

If you follow the exhaust towards the middle of the picture, you will see the anti vibration thingy (round piece of metal) and then just above the that is the black cylinder with a Nissan sticker. This is the electric motor of the HICAS. It connects on the right to the gearing that changes the angel of the rear wheels with the turn up to 1.5 degrees.

Cheers

Andy

post-41854-1242906547_thumb.jpg

Paramour Proficient

Paramour

Posted
Posted
Maybe this will help........

Sorry the quality is pretty crap but it will give you the idea.

If you follow the exhaust towards the middle of the picture, you will see the anti vibration thingy (round piece of metal) and then just above the that is the black cylinder with a Nissan sticker. This is the electric motor of the HICAS. It connects on the right to the gearing that changes the angel of the rear wheels with the turn up to 1.5 degrees.

Cheers

Andy

many thanks mate. . will check in the morning

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...