Jump to content
SAU Community

Recommended Posts

I was just about to buy a set of Tanabe Sustec Pro NF Coilovers. The supplier came back to me asking if I have Hicas or not, apparently if you have Hicas the coilovers can rub on some of the machs.

I am still to establish wether or not I have Hicas or not, however I am under the impression that if the car has Hicas there is a dash light which will come on when you turn the ignition. There is no Hicas light on my dash, so unless the bulb has blown I am assuming I don't have it.

I have had both gtst's and gtr's with Hicas, and there is always a dash light on ignition.

Any-one had any experience with any of the above

Link to comment
https://www.sau.com.au/forums/topic/270935-nm35-hicas-and-coilovers/
Share on other sites

Hi Nick

If your car has HICAS you will have a light that comes on with ign.

You can see the HICAS control on the back of your rear sub frame. When looking under from the back it looks kind of like a wiper motor blocking the view of the diff. Mabye you could google and get a picture.

Muz

Completely off topic, unless you have something rare you mispelt Stagea in your profile :ninja:

Only a few of the models had HICAS, it's not a common features except for the

If you want to make double sure you could probably get someone to FAST the VIN Number and confirm if HICAS was factory fitted.

(extracted from Wikipedia)

  • 250tRS FOUR V HICAS: A 250tRS FOUR V with the addition of the Nissan HICAS four wheel steering system
  • AR-X FOUR: A 250t FOUR (ie 2,5L turbo/4wd) model with increased ride height and SUV-like body ornaments. 206 kW (276 hp)
  • The were 4 'aero selection' models added in 2002 to the 250RS/250tRS FOUR/250tRS FOUR V/250tRS FOUR V HICAS ranges, this added a bodykit to the standard car

Hi Nick

If your car has HICAS you will have a light that comes on with ign.

You can see the HICAS control on the back of your rear sub frame. When looking under from the back it looks kind of like a wiper motor blocking the view of the diff. Mabye you could google and get a picture.

Muz

Thanks, there is no light and nothing blocking the diff. Suspension and hubs all look ok. Don't think I have Hicas.

Its like a disease

Completely off topic, unless you have something rare you mispelt Stagea in your profile :D

Only a few of the models had HICAS, it's not a common features except for the

If you want to make double sure you could probably get someone to FAST the VIN Number and confirm if HICAS was factory fitted.

(extracted from Wikipedia)

  • 250tRS FOUR V HICAS: A 250tRS FOUR V with the addition of the Nissan HICAS four wheel steering system
  • AR-X FOUR: A 250t FOUR (ie 2,5L turbo/4wd) model with increased ride height and SUV-like body ornaments. 206 kW (276 hp)
  • The were 4 'aero selection' models added in 2002 to the 250RS/250tRS FOUR/250tRS FOUR V/250tRS FOUR V HICAS ranges, this added a bodykit to the standard car

Seems as though the 250t with Hicas also had a bodykit, I have no body kit therefore I have no Hicas

yeah just take a photo and we can tell you

also, i have the body kit and i DONT have hicas. then again i have an RX and hicas wasnt an option. it was on RS. ARX all have them, and AXIS im not sure

OK, I will look for the pump thing and take a photo. Thanks

no no i know wat it looks like...

well near the diff area a massive plug looking thing...

Can someone with HICAS please post up a pic so us less HICAS-ologists have a better understanding of what to look for or be prepared not to see under our stags. . .

Can someone with HICAS please post up a pic so us less HICAS-ologists have a better understanding of what to look for or be prepared not to see under our stags. . .

Maybe this will help........

Sorry the quality is pretty crap but it will give you the idea.

If you follow the exhaust towards the middle of the picture, you will see the anti vibration thingy (round piece of metal) and then just above the that is the black cylinder with a Nissan sticker. This is the electric motor of the HICAS. It connects on the right to the gearing that changes the angel of the rear wheels with the turn up to 1.5 degrees.

Cheers

Andy

post-41854-1242906547_thumb.jpg

Maybe this will help........

Sorry the quality is pretty crap but it will give you the idea.

If you follow the exhaust towards the middle of the picture, you will see the anti vibration thingy (round piece of metal) and then just above the that is the black cylinder with a Nissan sticker. This is the electric motor of the HICAS. It connects on the right to the gearing that changes the angel of the rear wheels with the turn up to 1.5 degrees.

Cheers

Andy

many thanks mate. . will check in the morning

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
×
×
  • Create New...