Jump to content
SAU Community

Recommended Posts

Hi guys ive a new z32 to fit to my 97 rs4 but cant seem to find the wiring info to change it over from the 3 wire stock plug to the 4 wire z32 plug. Can anyone who has done this help me out with the info please.

Link to comment
https://www.sau.com.au/forums/topic/271339-z32-airflow-meter/
Share on other sites

I find the search function on SAU difficult but got this:

"the z32 will not run on the stock ecu so dont bother

but when it comes time to wire it up you join the ground wires

ie on the Z32 there are two ground wires one is for signal ground and the other is just ground

on the R33 S2 loom you have one ground wire, so you just join them all together

but dont try it with the stock ecu - it no worky and will run like a whore"

I don't remember if you have an aftermarket ecu yet but maybe an SAFC will suffice. I will be getting a Z32 afm soon and hopefully my chipped ecu will run it OK. Did you get a brand new one (and if you don't mind) from where and how much?

I find the search function on SAU difficult but got this:

"the z32 will not run on the stock ecu so dont bother

but when it comes time to wire it up you join the ground wires

ie on the Z32 there are two ground wires one is for signal ground and the other is just ground

on the R33 S2 loom you have one ground wire, so you just join them all together

but dont try it with the stock ecu - it no worky and will run like a whore"

I don't remember if you have an aftermarket ecu yet but maybe an SAFC will suffice. I will be getting a Z32 afm soon and hopefully my chipped ecu will run it OK. Did you get a brand new one (and if you don't mind) from where and how much?

Im running a greddy emange ultimate so im sure once its fully mapped the standard airflow will need replaced with the z32 one. The one i have i purchased from nissan japan i cant remember how much it was but it wasnt cheap oem parts from japan usally aint!

Sorry but Im still unsure as to how to wire it up. My stageas loom that goes to the airflow has 3 wires 1 signal? 1 signal ground? and then 1 ground? yes?

My z32 has 4 1 signal? 2 signal ground and 1 ground yes?

Do i take the 2 signal grounds and just connect both to the stagea signal ground?

Im running a greddy emange ultimate so im sure once its fully mapped the standard airflow will need replaced with the z32 one. The one i have i purchased from nissan japan i cant remember how much it was but it wasnt cheap oem parts from japan usally aint!

Sorry but Im still unsure as to how to wire it up. My stageas loom that goes to the airflow has 3 wires 1 signal? 1 signal ground? and then 1 ground? yes?

My z32 has 4 1 signal? 2 signal ground and 1 ground yes?

Do i take the 2 signal grounds and just connect both to the stagea signal ground?

Try this

Use the series R33 install

Iused this on my series stagea and worked fine

http://www.skylinesaustralia.com/forums/Fi...;hl=z32+install

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • your right the maps for Australia came out in 2017 but are 2010 maps. i got the updated maps SD card put it in and it was the same. Same maps in my Brothers Nissan Patrol. 2020 i think his car is
    • Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
    • I'm not 100% how the BMW racers do it, but I know from other brands like Merc, moving, and changing the coolers is one of the things. Like getting a transcooler out from infront of the radiator to out near a wheel arch. So some of the stuff you've got crammed in the middle front, spread it out and open up where you can in the bar to get more air in to the sides.
    • Small update for the day... Turns out the intercooler and engine coolant hose kits are anything but complete....I probably should have counted better but it only really covers about half the coolant hoses in the car, it really just covers the visible stuff and pretends everything else doesn't exist (turbo water feed and returns and also heat exchanger lines through the 2 pumps and cooler) .In any case, I'm happier to have half reliable hoses than none, but a bit of a disappointment. Anyway...finger click (and 5 hours).....hoses in place, lots of spring clamps replaced with screw clamps, and engine coolant is on the pressure tester for the night.   Incidentally, upsized header tank is an Inifiniti factory option....not sure I'll ever do prod car racing in this but at least it is legal.
×
×
  • Create New...