Jump to content
SAU Community

Recommended Posts

Ran my 32 gtr at heathcote today.

1st run i ran a 13.4 @ 113mph 2.38 60ft :(

2nd run was a 12.3 @ 109mph 1.86 60ft

3rd run i ran a 12.1 @ 108mph 1.74 60ft

Was kind of dissapointed i didn't break 11's today but it's my 2nd week owning the car and my first launch of the day was my 3rd time ever launching this thing... was also my first time at a drag strip.

On the first run i was shifting at 7k and the other 2 i was shifting at about 8, so obviously 7k is the sweet spot. How far into the 11's do you think i could go shifting at the right spot with a 1.7 60ft? Obviously i would be getting over 113mph.

Car is making 330rwkw

Link to comment
https://www.sau.com.au/forums/topic/271540-heathcote/
Share on other sites

Tyres, suspension and ride height................ all have major effect at the drags.

Well i mean running it exactly the same as i did today but with a higher mph. 108 is pretty gay considering i got 113 with a poo 60ft. Cbf adjusting my suspension atm

Edited by topher_
Link to comment
https://www.sau.com.au/forums/topic/271540-heathcote/#findComment-4614042
Share on other sites

Well i mean running it exactly the same as i did today but with a higher mph. 108 is pretty gay considering i got 113 with a poo 60ft. Cbf adjusting my suspension atm

Thats how it works... generally MPH is lower if the 60ft/ET is faster.

Sadly though, you dont have 330rwkw with only 108mph/1.760ft... much less infact.

Link to comment
https://www.sau.com.au/forums/topic/271540-heathcote/#findComment-4625042
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...