Jump to content
SAU Community

Recommended Posts

Ok so we probably agree the rear end takes a bit of getting used to.

i've not even taken delivery of the car yet and i want it cleaned up and looking a bit nicer.

Looking at wing options, Highway Dolphin looks a bit excessive, Masa's wing looks like it may be a winner, tho i also like what i think is the stock item? but cant find many photos of it?

Masa

007.jpg

Are there any others out there that look similar? and dont look too much over the top?

I think they both sit a little bit too high :)

i like how the masa one is lower,

but keep em coming, there is actually a dolphin one in silver on Yahoo at the moment.. was considering it for 300 or so delivered.

I think they both sit a little bit too high :)

i like how the masa one is lower,

but keep em coming, there is actually a dolphin one in silver on Yahoo at the moment.. was considering it for 300 or so delivered.

Is larger than the Nismo one.

Here are a couple;

Balsinari

post-31842-1243222818_thumb.jpg

Pond

post-31842-1243222810_thumb.jpg

???

post-31842-1243222832_thumb.jpg

I have also seen a little black spoiler that would be no higher than 15mm and looks like it is an OE part of the rear door (it isn't).

Edited by iamhe77

rofl, so i take it thats not one of their wings

go on the yahoo auctions (or via IM) and check the masa stuff on there, it looks different. its a pity the wings are around $700+commission+delivery blah blah

Yeah, I'm very familiar with yahoo japan :D probably spent a years salary on it over the years..

i really dont like their actual wing. i think its Pond's for sure.. but i want the one on the masa car..

As for other things going on, R34 Gtr wheels will be going on, along with an exhaust prob a custom job done by my friends @ Westside in Padstow, Sydney

got a few Interior parts on yahoo already few things broken in the car that need replacing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...