Jump to content
SAU Community

Recommended Posts

For the price (around $120-140 per side) not something i would waste a day or 2 on, even the CV specialist said he had some trouble with it...By the time you buy the boots and the packing grease its just not worth it.

If you are keen to do the job click on the link below and ask for a price for the boot kits only. You don't have to bid or buy at this point but be sure to specify inner or outer and give the details asked (such as model, year, 2 or 4wd auto or man etc). His prices for the complete cvs are good and he has a range of boot kits (ask for the cost of posting to Aus): http://www.trademe.co.nz/Trade-Me-Motors/C...n-220086277.htm

If you are keen to do the job click on the link below and ask for a price for the boot kits only. You don't have to bid or buy at this point but be sure to specify inner or outer and give the details asked (such as model, year, 2 or 4wd auto or man etc). His prices for the complete cvs are good and he has a range of boot kits (ask for the cost of posting to Aus): http://www.trademe.co.nz/Trade-Me-Motors/C...n-220086277.htm

front left outer, 97 rsfour auto.... could you send him a message and check the price for me rob?

was under mine today on the hoist having a look for ya and wouldnt be too hard to pull em, when you get it off, keep the boot in one peice if possible and take it to an repco or autopro and get em to match up an aftermarket boot off something else, aslong as its close you will be alrite, and will only cost you about $25 -$35 for a boot kit man,

any problems man i can get mine on the hoist and take some pics for ya. let me know

Was talking to a mate bout this the other day. My left front boot is split. He fixes/mods cars on the side. He recomended that if I did the boot I may as well do the whole cv, as time n effort it takes, may as well change it all whilst your there. their not expensive so may as well so you don't have to do it all again.

Well i took the wheel and caliper off thismorning.

Looked at the grease and shit mess it had made and thought ehhhh this has to be fixed today. Started getting over it quickly and called CV driveshafts and steerting here in south aus at lonsdale. Put it back together and drove their. I arrived had it on hoist in minutes and after a quick look said it should be pretty easy. 2 hours later and $176 and both the front outer boots were done as once it was on the hoist we could see the left side had started to weap aswell.

And confirming they were the same as N15 pulsar boots :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • Should have asked what is the car?
    • I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
×
×
  • Create New...