Jump to content
SAU Community

Recommended Posts

There are too many variations with ECU’s Teren.

I will require a VIN number (original Japanese) to be able to trace the correct part. A part number off the ECU itself will be sufficient.

Many Thanks,

Andrew

....vin or part number please guys....

  • Replies 111
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

There are too many variations with ECU's Teren.

I will require a VIN number (original Japanese) to be able to trace the correct part. A part number off the ECU itself will be sufficient.

Many Thanks,

Andrew

....vin or part number please guys....

Just incase there are any problems with the vin # the markings on the ECU (courtesty of Iain) are:

Nissan JA

A56-R12 L18 1Y03

UNISIA JECS CORPORATION

JAPAN

It's also a negative from NissWreck, they are unable to assist.

I was trying to get them to import a wrecked M35 in there next container, but alas they can't help :)

I asked if they could just bring the ECU in but same result!

ok so i will cal my brother and get him to track down whoever bought that black wreck off pickles the other week who tried to sell on ebay..

I was wondering where that cowboy got to, the only real option he has with the car is to sell it whole to a wreckers or to part it up himself. It can't be re-registered so he is really up the creek.

Let us know how you get along, would be interesting to find out what become of the car once it was taken off ebay.

A few people said they had emailed him but I've not seen any feedback to say that they had got a reply.

Called him today, hes found a few front cuts in Brisbane, but they wont separate the ecu from the fronts.

they said they will try grab just an ecu for their next container.

So i asked him to see if he can track down the black one for me as that seems like the easiest option.

Called him today, hes found a few front cuts in Brisbane, but they wont separate the ecu from the fronts.

they said they will try grab just an ecu for their next container.

So i asked him to see if he can track down the black one for me as that seems like the easiest option.

F*CK, you'd think if they were front cuts they wouldn't mind seperating the ECU, I gather they want someone to buy the whole lot just for one part? f*ckity f*ck

Yeah, I'm still interested to find out what become of the black one that was removed from ebay.

http://www.importmonster.com.au/view?url=h...g&title=833 H16 M35 250RS V CPU

says m35 2250 rs v but numbers are no where the same as Ians....

I don't think that is the right one. Needs to be a 250T RS

I don't think that is the right one. Needs to be a 250T RS

Any is correct, that isn't the ECU we are after :)

I'm starting to think this is going to be a long and difficult process lol

Can anyone let me know which wreckers have the front cut (or whole M35) as I need a small plastic scoop vent sort of bit. Thanks

If you mean the cold air intake scoop that sits above the radiator and directs cold air into the airbox, any V35 item will fit (same part).

Edited by iamhe77
If you mean the cold air intake scoop that sits above the radiator and directs cold air into the airbox, any V35 item will fit (same part).

nope it's asmaller one. Sits down below the grill on the left and is about 20 cm's long and scoops air into the intercooler.

nope it's asmaller one. Sits down below the grill on the left and is about 20 cm's long and scoops air into the intercooler.

Aahhh yes.

Mine had a 40mm split from the left corner towards the intercooler.

One minute and some "Tarzan Grip" later, it is a good as new... can't even see the split :banana:

Called him today, hes found a few front cuts in Brisbane, but they wont separate the ecu from the fronts.

they said they will try grab just an ecu for their next container.

So i asked him to see if he can track down the black one for me as that seems like the easiest option.

I'm going to Brisbane in a couple of weeks.

Could you please find out which wreckers have the front cuts and get their names and possibly addresses?

I would like to see what other parts they might have - boost guage, wood trim, driving lights etc

MM

Aahhh yes.

Mine had a 40mm split from the left corner towards the intercooler.

One minute and some "Tarzan Grip" later, it is a good as new... can't even see the split :blink:

i bought some glue today and went to attach it and found out that some of it must have falen off on the road where the "ahem" incident happened :laugh:. So there wasnt enough left to attach it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...