Jump to content
SAU Community

Recommended Posts

And I'm not joking about Melb being sunny because it's absolutely glorious weather here! So we decided to take a trip and while doing so I wanted to see how far I can stretch on a full tank of juice. Having consistently achieving about 500-550kms in city driving, I was very curious of how much better economy on the freeway. Well the car travelled to Albury, about 600kms and it drank 65 litres so on a full tank based on being 80L i think, I could have achieved about 740kms. Which is pretty darn good.

So how does everyone do on the freeway?

Oh I forgot to mention that not everything have been smooth sailing. Firsty I got pelted with gravel and hence scored 2 cracks on the windscreen, but the worst one was my right front plastic overfender flew off somewhere between Goulburn and Gundagai so if anyone happens to drive through and see it, say hello to it!

Yep, Ian is right again.

Jetwreck lost one on his way to Phillip Island. They are not cheap either.

Last time I did the drive of Canberra to Sydney I think it worked out at 9.8km / Litre.

They can be alright on the open road if you don't get into them too hard.

We got to Melb on Thursday. I checked the events section but no meets which is ashame.

oh damn. go to the Victoria section. then events.

was a big kebab cruise last night. about 25-30 cars at the meet point.

but the worst one was my right front plastic overfender flew off somewhere between Goulburn and Gundagai so if anyone happens to drive through and see it, say hello to it!

that's the second one in that part of the road.....$370 from memory!!!!!

that's the second one in that part of the road.....$370 from memory!!!!!

You forgot the Nissan dealer moto, "prepare to get bent over"

Dare I ask why they keep falling off?! Are they bolted or screwed in or just those little plastic fastners that seem to hold most of the car together? lol

my tripcomputer thingmee says I'mgoing to get 440km's around town or something, does seem thirsty!

I'm confused by the whole km's per litre thing so i'm doing my own recording on an iphone app and I'll be able to work out the exact mileage I'm getting so I can see if there's something wrong (o2 sensor or anything)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...