Jump to content
SAU Community

For Swap! I've Got Some R34 Gtr Wheels

Guest
 Share

Recommended Posts

Guest

Guest

Posted
Posted

Hey guys,

Well as the topic states i've got some R34 GTR wheels currently on my 33 gtr and i'm wanting to swap them for some Work Emotions in BLACK 18x9.5 (with gtr offset of course). I'd be looking for about $500 my way on top of the wheels. Tyres need to be in really good nick, with 90% + tread on them.

The 34 wheels i've got are the normal gold colour, great condition with heaps of tread left on the tyres. We all know what they look like but i'm happy to send pics if needed.

Located in Lilydale, VIC.

Contact me (ash): PM, [email protected]

Cheers

Guest

Guest

Posted
Posted

BUMP! Its the CR-KAI rims im after....

If you are interested in buying these i'm not selling them straight up because I don't have any wheels to put on my car, you'd have to buy the wheels im after then a swap can be arranged.

Sorry for the inconvenience but i dont have the time to try to get replacement wheels.

  • 4 weeks later...
KR4-GTR Mentor

KR4-GTR

Posted
Posted
6280_108459909084_659359084_2859500.jpg

this is without the gtr centre caps, they were still drying at the time....

tell me this looks worse than the yucky stock wheel colour

im going to be honest but only because you asked for it.

yes, "this looks worse than the 'yucky' stock wheel colour" :rofl:

for further discussion - maybe add a thread in a discussion section, so we dont get busted for having a general convo in here :banana:

KR4-GTR Mentor

KR4-GTR

Posted
Posted (edited)

check out the time stamp of this post.

this thread still keeps me up at night.

WHY BLACK!? WHY!? :bunny:

anyone else have a set? i'm willing to pay a damn good price for these rims in the stock colour! PM me!

Edited by KR4-GTR

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...