Jump to content
SAU Community

Recommended Posts

What condition are your pads in? If you have plenty of meat left on them, I'd say you'd be fine, definately flush the brake fluid though and check the pressures in your tires

ah k rears are good front is low and theres bit (large) of a lip on the rotor, friend said it wouldn't need to be changed (rotors) but i really have no idea

Id start with tyre pressures around 26psi as they will raise to over 40 when hot. Otherwise you'll be skidding like a mofo.

I'll go high like suggested and let air out if i need to.. and go get pressure checker thing.. do we need to bring the receipt with us? cos i have no clue where I've put mine haha

  • Replies 383
  • Created
  • Last Reply

Top Posters In This Topic

^^ that article is all good and well but he still needs the 'G Sensor'

Not necesarily, the computer just needs a voltage input which theoretically could be from any source - not sure what else would go wrong though... :D

Is all beyond my skills to be honest but would be interesting to find the answer either way.

do we need to bring the receipt with us? cos i have no clue where I've put mine haha

receipt on the day is not necessary, but if your name's not on our list, you won't be able to drive :lol:

you'll need to bring your driver's licence though.

receipt on the day is not necessary, but if your name's not on our list, you won't be able to drive :lol:

you'll need to bring your driver's licence though.

Ok i know you have told them to resend the reciept to my email but checked it today and still no email with the reciept....so i have PMed you

Thanks mate

Oh well i start with 25 psi and my pressures are above 42 psi after i come off from the 5th lap and thats with my Hankoon Venti S1 street tyres 275/35/19.

damn those are wide tires.. had 235(F) & 255® b4, but gone to 235(F) & 245®

just about to order some new engine mounts and some acre brake pads. hopefully they get here before tuesday.

:EDIT: and 20 minutes later, pads are ordered and paid for, just waiting on a reply from driftshop for the engine mounts. $279 for 2 urethane mounts beats the shit out of $430 for 2 oil filled genuine nissan mounts.

Edited by scandyflick

car overheated on the way to nightshift last night(was driving peacefully). looked down at temp gauge and was like wowzer had to dump the car and wait for a mate.. picked it up and drove it home this morning no problems so i got no idea what to.. do.. oil is fine and coolant is good so :S :EDIT: overflow bottle is empty :S going now to see if i can buy more and top it up

My rims on the GTR are 10.5" wide all around. So 275's front and rear, who says 34GTR's dont have wide guards :(

you not the only 1 with 275s mate :P mine are only 18s though

Edited by Inline 6
hi kim...still no response mate????

i just spoke with Dean and he said that he has emailed it twice now. can you PM me your email address or fax number and i will send it to you myself.

cheers - Kim

i just spoke with Dean and he said that he has emailed it twice now. can you PM me your email address or fax number and i will send it to you myself.

cheers - Kim

PMed you before about it but will PM you again

thanks man

there may be some confusion about helmets arising from a recent email from Dean at John Bowe - the original promotion for this event was that helmets were not mandatory. i have just spoken with Dean a few minutes ago and he confirms this, but we agreed that you are welcome to use a helmet for the higher speed sessions in the afternoon.

so helmets are not mandatory required equipment, but you can use one if you have one. Dean sent out an email to this effect while i was on the phone just now.

other than that, please read the receipt / Booking Confirmation that he has emailed you and go through the checklist again.

i'll email/PM everyone details on meeting up in the morning if you want to go up to Mallala with a group. any other problems, please let me know.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...