Jump to content
SAU Community

Recommended Posts

  • Replies 182
  • Created
  • Last Reply

Top Posters In This Topic

Sorry Andrew -1 on this....will be able to lend you my current standard in a couple of weeks though if you still need it.

Hey mate,

Not a problem, would we be able to make up something similar to the image above off the standard shape/size?? otherwise i'll probably just use my car to make it up.

Hey mate,

Not a problem, would we be able to make up something similar to the image above off the standard shape/size?? otherwise i'll probably just use my car to make it up.

I just purchased the one as per your image.

I'll get some photos of current work, he does lots of high end fabrication tho, you look in just about every high performance mag and you will find their work :D

i was thinkin of getting something done similar to the dolphin job? but i'm open to the best suggestion!! is the stock dump the same size as the dolphin job??

post-31456-1243930499_thumb.jpg

Flange looks tricky to source but i will pop into a shop tomorrow to see if they can get it. otherwise i will get a gasket and we will lazer cut a flange from it.

any coatings can be done also. prob best to get em ceramic coated or the like.

Dolphin dump is a different design again (much straighter)

DolphinDumpPipe.jpg

If you are designing one, try to get it is straight as possible.

Yes the OE dump as a small cat on it. Are you able to get a cat to fit on a 3 or 2.75" dump and fit it in that space?

If so, I would be very interested as I need a cat-fitted dump pipe on mine.

Ok i have the flange, will have to get some more made this isnt the neatest.

i'll be needing a stock dump, or something soon so if anyone has that would be great. otherwise my cars off the road and dump will get pulled out..

we're open to designs on which would be best option for all. i'd rather have it like the first design, and a cat under the car in between dump and front pipe.

3inch i guess everyone is after?

If anyone is interested in a split dump pipe.

liverpool exhaust have a mild steel ceramic coated one made up.. soon to be on the market.

i'm not going to make up a split dump tho since the exhaust housing isnt split too well and i simply dont like the idea anymore. would rather have a complete 3inch all the way.

Ok i have the flange, will have to get some more made this isnt the neatest.

i'll be needing a stock dump, or something soon so if anyone has that would be great. otherwise my cars off the road and dump will get pulled out..

we're open to designs on which would be best option for all. i'd rather have it like the first design, and a cat under the car in between dump and front pipe.

3inch i guess everyone is after?

Cat after dump is not good for me personally.

I have the de-cat Kakimoto 80mm front pipe that bolts straight up to the OE dump (and to my Legalis exhaust) so I guess I will be sticking with the OE dump.

Ok, will see what the majority wants really. but it may not be a problem to modify what you want done. will obviously cost more since there is a Pussy involved..

Understandable.

Let me know if there are any options for a cat to be added to the dump. If not, no stress.

Gotta have at least one cat as I don't want all that carbon sh!t on my rear bumper.

Edited by iamhe77
Understandable.

Let me know if there are any options for a cat to be added to the dump. If not, no stress.

Gotta have at least one cat as I don't want all that carbon sh!t on my rear bumper.

Pussy and cars dont mix :D

if the dump we make is long enough to house a cat i dont see a problem.. just clearance may be an issue, and it will be welded on permanent i'd say/

will try get stuck into this this arvo when i finish work

Pussy and cars dont mix :D

if the dump we make is long enough to house a cat i dont see a problem.. just clearance may be an issue, and it will be welded on permanent i'd say/

will try get stuck into this this arvo when i finish work

What do you want a cat for anyway? :) Will talk to you on Sunday about the possibility about lending it....will be about two weeks till I get it though.

cheers

Craig

What do you want a cat for anyway? :) Will talk to you on Sunday about the possibility about lending it....will be about two weeks till I get it though.

cheers

Craig

Hey mate, sounds good.

yeah i dont like cats at all, like trying to breathe thru a pillow :D

i'll either be pulling mine apart tonite to get the standard dump off to make a jig out of or borrowing one. the standard dump will be fine..

so chances i may not even need to borrow it..

thanks anyhoo :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...