Jump to content
SAU Community

Need A Part Number For These Little Attachers

Houdini
 Share

Recommended Posts

Houdini Rising Star

Houdini

Posted
Posted

The local NIssan guys couldn't find this part (these are the black plastic attacher things that seem to hold most of the car together :blink:, specifically I need them for the front grill and bumper but they all look the same):

20090602dsc0541.jpg

They wanted to start down the VIN number drama process but I thought it'd be way easier if I could find apart number.

iamhe77 Grand Master

iamhe77

Posted
Posted

Dunno which Nissan you are going to, but they all have 'em.

Even Frankston Nissan has those clips (and their service dept is next to useless - speaking from experience).

Take one in to the parts guys, they will bring out a whole box of those clips. They are used on all recent(ish) Nissans

Houdini Rising Star

Houdini

Posted
  • Author
Posted
Dunno which Nissan you are going to, but they all have 'em.

Even Frankston Nissan has those clips (and their service dept is next to useless - speaking from experience).

Take one in to the parts guys, they will bring out a whole box of those clips. They are used on all recent(ish) Nissans

You'd think huh. I live in the Nations Capital though and it's like living in the back of f$&*ng nowhere.

I took one in and he brough out one that looked similar but not the same. Then wanted vin and chassi number and moaned about these imports being very tricky even though I told him the clips are probably on every new car on the lot!

iamhe77 Grand Master

iamhe77

Posted
Posted (edited)
You'd think huh. I live in the Nations Capital though and it's like living in the back of f$&*ng nowhere.

I took one in and he brough out one that looked similar but not the same. Then wanted vin and chassi number and moaned about these imports being very tricky even though I told him the clips are probably on every new car on the lot!

Nation's Capital by default.

That sounds like the typical narrow minded approach of 80% of Nissan Dealers.

Go elsewhere. There has to be more than one Nissan dealer in Canberra... I would assume?

Why not get Hornsby Nissan to send you a heap?

Edited by iamhe77
Houdini Rising Star

Houdini

Posted
  • Author
Posted
how many do you need and how much of a hurry

I found a couple of half good one's floating around in the boot storage and used those so I guess I need three (one's gone and two are loose) for the moment. It's holding together OK now with the found one's but I don't want to leave it like that for too long.

Punk72 Community Regular

Punk72

Posted
Posted
I found a couple of half good one's floating around in the boot storage and used those so I guess I need three (one's gone and two are loose) for the moment. It's holding together OK now with the found one's but I don't want to leave it like that for too long.

i will be able to get you three but it may take a week if you wanted to wait that long

Psymon Mentor

Psymon

Posted
Posted (edited)

Try 01553-09321

Should be the ones. :down:

Edit: Found some energy and went and pulled some out, they look pretty good to me. Any Nissan dealer should carry those clips.

Edited by Psymon
iamhe77 Grand Master

iamhe77

Posted
Posted
Try 01553-09321

Should be the ones. :D

Edit: Found some energy and went and pulled some out, they look pretty good to me. Any Nissan dealer should carry those clips.

Just depends what they charge for the little buggers *hint* $2.50 per clip is NOT satisfactory!

Houdini Rising Star

Houdini

Posted
  • Author
Posted

I've officially exhausted all my Nissan options in Canberra with no luck in obtaining what appears to be simple for the rest of Australia (including Tassie - no offence). I might as well drive to freakin Crookwell* for them!

*small Country town reference showing not that Crookwell is bad but that Canberra sucks ass for getting anything: Concerts, Movies and Car parts.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • DraftySquash
      Looking for someone with a R34 front bar

      By DraftySquash · Posted

      Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Dose Pipe Sutututu
      new 1.5 LSD issues/concerns

      By Dose Pipe Sutututu · Posted

      Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • MBS206
      Most women will agree that parking is the most taxing part of driving

      By MBS206 · Posted

      It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...