Jump to content
SAU Community

Recommended Posts

hi guys im searching for some injectors, prefferebly new ones..

i have a r34gtt with a 500hp turbo and want to get my power upto 300rwkw.

Just wondering what size to go for and where to buy them????

cheers

steve

Link to comment
https://www.sau.com.au/forums/topic/272896-r34-gtt-injectors-for-300rwkw/
Share on other sites

anyone got some suggestions????????

550cc im pretty sure mate

just jap or pretty much any other trader on here, just check the trader sales section.

goodluck

Gezza

Ive got 480cc nismo for $600

1 month old just get a nismo reg as well and your all set

whats the reason your selling them, is there anything wrong with them?????

what power were you running with 480's?

Edited by Tough R34

has anyone got close to 300kw with 480's???? would there be a huge diffence with 70cc???

My car got dyno'd at 246kw but that was stretching the stock injectors to 98%

Its now tuned at 220kw with injectors back around the 80% mark.

Nismo don't make any larger than 480cc item for the R34 RB25det neo motor.

I would suggest buying the Nismo 480cc as above ^^^ and the bumping up the fuel pressure (with a FP regulator) twin spray pattern and high impedence, meaning less lag time for fuel to be injected, something like 0.01sec

Otherwise the other options that you have available are:

Highflow standard injectors - approx. $150 each (which aren't the best, can f!ck up spray pattern, impedence etc)

Sard injectors - 600cc or 800cc - they require a collar to be attached and aren't straight bolt in approx. $1200-1400

Blitz injectors - pretty much the same as sard injectors

HKS injectos - 650cc-850cc, requires hks fuel rail - all up approx. $1400

cheers for the info...

are the nismo's straight change over from stock???

has anyone seen 300kw with the nismo's?

i just dont want to get the 480's and then not be able to make that power range....

Nismo are the only direct bolt in, unless u have highflow of standard injectors.

Most of the members on this forum are also saying that 480cc will make 300rwkws.

Just make sure you have a good enough Fuel Pump and maybe the fuel reg

go the nismos n bump up the pressure with a reg. even with nismo injectors ive been told by justjap that u still need to purchase the o-rings. in which case its the same as the sard injectors then. only difference is that sards have a collar (spacer) which sits between the injector and the fuel rail. ive got sards, works a treat :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bah! I can't see the point in custom number plates at all. I went to the rego office, fished through a box of "premium" plates (the ones that had the "not as tall" option for the front plate) and picked the one that had a 32 in it. That's the limit of the effort and cost I will put into number plates. The only plate that I'd consider paying for would be 2332, but that's not possible here because it already exists from probably 90 years ago, and it would cost a fortune to obtain it, if it were available.
    • After chasing my tail with LS results..... and cheaper than a turbo swap... How confident are you that the dyno is accurate relative to other results? How fast is the car - What MPH does it actually run? Is this similar to what people running this power would expect?
    • Hi mate I am having an identical issue with my 98 R34 GTT. The engie suddenly cuts out under load at about 3-4k, black smoke out exhaust. Almost feels like traction control kicking in. No CEL but still going to check codes later today. Car was sitting in the shed for about 5 months before hand and only idled a few times, took her out with about 1/4 tank, filled up and thats when the issues started happening.  Threw on a spare set of coils/harness and checked plugs which was no help. Recently had fuel pump/filter changed so surely thats not the issue unless condensation in fuel, I just havent had the time to drain it It's running a hi flow turbo, bosch 1000cc injectors, walbro 450L, Z32, Nistune etc... All about 2000km old.
    • I always wonder where the obsession with legal/illegal spacing on number plates in the UK comes from. Because it comes up in comments in every UK-based video I see on youtube. From my point of view all of your plates look a bit odd. Just because there are no markings whatsoever. In Australia we have the state that has to be on it. In Europe you get stamps and state logos. Yours look a bit like a throwaway draft that people then stuck with. And attached with blu tack so that it falls off at the slightest disturbance. Not trying to hate, but it's interesting how things are done in different countries. Do you have to follow a lettering convention when choosing a custom plate?
    • Hybrid sounds like a supercharger... It's half a turbo, with a belt to drive it! Oh wait, they're just called super chargers...
×
×
  • Create New...