Jump to content
SAU Community

Wiring Loom Help

ali-turko

By ali-turko,
in General Maintenance

 Share

Recommended Posts

ali-turko Grand Master

ali-turko

Posted
Posted

hey guys

im in need of some help

ok iv just bought a new sub engine harness that connects to the starter motor, alternator ect..

as the old was a bit stuffed n i through it out when my motor got taken for a rebuild.

i was looking at it today and i reliased that there no plugs on for the knock sensors, now im pretty sure the old has knock sensor plugs connected to it, but this loom seems like you got buy another small loom that connect to it for the knock sensors and a few other things

iv attated a pic of the harness i bought from rhd japan and also a pic of a knock sensor loom i found on the net for an r32gtr

now this the second loom i bought cause i thought they may have sent the wrong loom, but it wasnt and i dont really wanna go and buy a knock sensor loom if its guna be a waste of money

i would really appreciate some help please guys

sub engine harness knock sensor loom

post-16324-1244002172_thumb.jpg post-16324-1244002372_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/273016-wiring-loom-help/
Share on other sites
heller44 Mentor

heller44

Posted
Posted (edited)

According to the r32 wiring diagrams, the 2x det sensors / aac valve / & air regulator are on a sub harness, connected via an 8 pin (2x4)connector.

But... I have never pulled the motor to see, just going off the diagrams. pge 790 of 804 btw, top left corner.

Edited by heller44
Duncan Grand Master

Duncan

Posted
Posted

that loom you got is the one that does starter, alternator, gearbox switches, battery etc lives on the chasis side.

what is the part # for the loom you have? looks like 24079-05U01 to me. If so the engine harness with knock sensors is 24077-05U21 and it lives on the engine side, and connects to the main engine loom at the rear of the fuel raill.

And if you have 2 of the wrong one....send me a price, its one of the few looms i haven't replaced yet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • Duncan
      M35 Brake caliper replacement

      By Duncan · Posted

      You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
×
×
  • Create New...